X12 810 Invoice
This Draft Standard for Trial Use contains the format and establishes the data contents of the Invoice Transaction Set (810) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide for customary and established business and industry practice relative to the billing for goods and services provided.
- ~ Segment
- * Element
- > Component
- None included
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- IN
- Invoice Information (810,819)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 810
- Invoice
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Beginning Segment for Invoice
To indicate the beginning of an invoice transaction set and transmit identifying numbers and dates
Date expressed as CCYYMMDD
- BIG01 is the invoice issue date.
Date invoice was generated. Displayed in CCYYMMDD format. Future dates are not valid. Dates over 17 months old are not valid. Date should be the same as the shipment date.
Date expressed as CCYYMMDD
- BIG03 is the date assigned by the purchaser to purchase order.
Identifying number for Purchase Order assigned by the orderer/purchaser
Partner PO Number
Reference Identification
To specify identifying information
Code qualifying the Reference Identification
- DP
- Department Number
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
- 0000
Reference Identification
To specify identifying information
Code qualifying the Reference Identification
- IA
- Internal Vendor Number
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Partner Assigned Vendor/Supplier #
Reference Identification
To specify identifying information
Code qualifying the Reference Identification
- IV
- Seller's Invoice Number
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Vendor's Packing Slip Number, Picking Ticket Number or Control Number.
Name
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- BY
- Buying Party (Purchaser)
Code designating the system/method of code structure used for Identification Code (67)
- 92
- Assigned by Buyer or Buyer's Agent
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
- 0808
Terms of Sale/Deferred Terms of Sale
To specify terms of sale
Code identifying type of payment terms
- If the code in ITD01 is "04", then ITD07 or ITD09 is required and either ITD10 or ITD11 is required; if the code in ITD01 is "05", then ITD06 or ITD07 is required.
- 02
- End of Month (EOM)
- 12
- 10 Days After End of Month (10 EOM)
Code identifying the beginning of the terms period
- 3
- Invoice Date
Terms discount percentage, expressed as a percent, available to the purchaser if an invoice is paid on or before the Terms Discount Due Date
Percentage of merchandise cost discounted if invoice is paid before the terms discount due date (ITD04).
Date payment is due if discount is to be earned expressed in format CCYYMMDD
Date payment is due to qualify for discount.
Number of days in the terms discount period by which payment is due if terms discount is earned
Date when total invoice amount becomes due expressed in format CCYYMMDD
Number of days until total invoice amount is due (discount not applicable)
Total amount of terms discount
Dollar amount of invoice merchandise cost discounted if invoice is paid on or before Terms Discount Due Date (ITD04).
The numeric value of the day of the month between 1 and the maximum day of the month being referenced
If using codes ‘02’ or ‘12’ in ITD01, this is the number of days after EOM the invoice is due
Terms of Sale/Deferred Terms of Sale
To specify terms of sale
Code identifying type of payment terms
- If the code in ITD01 is "04", then ITD07 or ITD09 is required and either ITD10 or ITD11 is required; if the code in ITD01 is "05", then ITD06 or ITD07 is required.
- 01
- Basic
- 05
- Discount Not Applicable
- 08
- Basic Discount Offered
Code identifying the beginning of the terms period
- 3
- Invoice Date
Terms discount percentage, expressed as a percent, available to the purchaser if an invoice is paid on or before the Terms Discount Due Date
Percentage of merchandise cost discounted if invoice is paid before the terms discount due date (ITD04).
Date payment is due if discount is to be earned expressed in format CCYYMMDD
Date payment is due to qualify for discount.
Number of days in the terms discount period by which payment is due if terms discount is earned
Date when total invoice amount becomes due expressed in format CCYYMMDD
Number of days until total invoice amount is due (discount not applicable)
Total amount of terms discount
Dollar amount of invoice merchandise cost discounted if invoice is paid on or before Terms Discount Due Date (ITD04).
Date/Time Reference
To specify pertinent dates and times
Detail
Baseline Item Data (Invoice)
To specify the basic and most frequently used line item data for the invoice and related transactions
Alphanumeric characters assigned for differentiation within a transaction set
Invoice line number
Number of units invoiced (supplier units)
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- EA
- Each
Price per unit of product, service, commodity, etc.
Price per unit
The price is sent with a decimal point only when needed, e.g., $15.95 would be sent as '15.95' and $29.00 would be sent as '29'.
Code identifying the type of unit price for an item
- LD
- Catalog Price per Dozen
- LE
- Catalog Price per Each
- NC
- No Charge
- QT
- Quoted (Default)
- WD
- Wholesale Price per Dozen
- WE
- Wholesale Price per Each
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- IT106 through IT125 provide for ten different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- EN
- European Article Number (EAN) (2-5-5-1)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
Identifying number for a product or service
UPC/EAN Code
Summary
Total Monetary Value Summary
To specify the total invoice discounts and amounts
Monetary amount
- TDS01 is the total amount of invoice (including charges, less allowances) before terms discount (if discount is applicable).
Total amount of the invoice plus all charges minus all allowances.
Monetary amount
- TDS02 indicates the amount upon which the terms discount amount is calculated.
- TDS02 is required if the dollar value subject to discount is not equal to the dollar value of TDS01.
Carrier Detail
To specify transportation details for the transaction
Code specifying the method or type of transportation for the shipment
Standard Carrier Alpha Code
If not available, do not send CAD segment. See Data Element 140 for list of valid codes.
Code qualifying the Reference Identification
- BM
- Bill of Lading Number
- CN
- Carrier's Reference Number (PRO/Invoice)
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Invoice Shipment Summary
To specify summary details of total items shipped in terms of quantity, weight, and volume
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- BX
- Box
- CA
- Case
- PK
- Package
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- 50
- Actual Kilograms
- LB
- Pound
- OZ
- Ounce - Av
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- Number of line items (CTT01) is the accumulation of the number of IT1 segments.
If used, hash total (CTT02) is the sum of the value of quantities invoiced (IT102) for each IT1 segment.
Total number of line items in the transaction set
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Assigned number originated and maintained by the sender
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.