6311 Measurement attribute code

Code specifying the measurement attribute.

Type
String (AN)
Length
Min 1 / Max 3
Codes
CodeDescription
AAALine item measurement
Line item measurement specified by the Food and Drug Administration.
AACRetail container size
Size of a retail container in terms of volume.
AADOther US Government agency application
Description to be provided.
AAEMeasurement
[6314] Value of the measured unit.
AAFCustoms line item measurement
The measurement of a consignment or part for customs purpose.
AAGPercentage of alcohol (by volume)
The measurement of the percentage of alcohol by volume.
AAHDimensions total weight
Description to be provided.
AAIItem weight
Weight at line item level.
AAJVisa quantity
Measurement reportable for visaed merchandise.
AAKLicence (quantity deducted)
Quantity to be written off from the total license amount.
AALCargo loaded
Total tonnage of cargo loaded onto the conveyance.
AAMCargo discharged
Total tonnage of cargo unloaded from the conveyance.
AANWeight of conveyance
Tonnage of conveyance.
AAOConveyance summer dead weight
Registered summer dead weight total tonnage of the vessel.
AAPContainerized cargo on vessel's weight
Total weight of containerized cargo on vessel.
AAQNon-containerized cargo on vessel's weight
Total weight of non-containerized cargo on vessel.
AAR1st specified tariff quantity
Primary reportable quantity associated with a tariff number.
AAS2nd specified tariff quantity
Secondary reportable quantity associated with a tariff number.
AAT3rd specified tariff quantity
Third reportable quantity associated with a tariff number.
AAUPackage
Commodity/product shipped or sold in discrete individual containers which may be accumulated in a larger package.
AAVPerson
Physical measurement of a person.
AAWAccuracy
Accuracy of the measurements being sent.
AAXConsignment measurement
Measurement related to a consignment; to be specified by the measurement code dimension value.
AAYPackage measurement
Measurements of package.
AAZHandling unit measurement
Measurements of handling unit.
ABAUnit of measure used for ordered quantities
The unit of measure in which ordered quantities are expressed.
ABIVentilation
The number of air exchanges per hour.
ABJOriginal unit of issue
A code identifying the original unit of issue.
ABKExternal dimension
The outer measurement of the referenced item or package.
ABLInternal dimension
The inner measurement of the referenced item or package.
ABMTest piece dimensions
The size of the test piece that was tested.
ABNAverage reading
Average reading of the test being reported on.
ABOComparison price measurement
A measurement used for comparison pricing purposes.
ABPUnit of measure per unit of issue
Provides the unit of measurement which is to be used for a given unit of issue.
ABQAir flow
The movement of air.
ABRCertified weight
Weight which has been certified.
ABSVelocity
Speed.
ABTSupplementary unit
Supplementary unit referring to the measurement reported.
ABUQuota
Maximum number or amount.
ABVUnit of time
The specification of a specific unit of time.
ABWUnit of measure used for invoiced quantities
Unit of measure of invoiced quantity.
ABXUsable or consumable content
Measurement of usable or consumable contents.
ABYPayment cycle
Measurement of the period of time over which payment occurs.
ABZPlot size
The relative bigness of a plot or an allotment of land.
ACASpace occupied
Space taken up or filled.
ACBBuilding size
The relative bigness of a permanent fixed structure forming an enclosure.
ACCOffice size
The relative bigness of a room or building used for clerical or similar work.
ACDArea damaged
The size of an area that was damaged.
ACELand size
The relative bigness of an expanse of ground.
ACFIndustrial plant size
The relative bigness of a factory or facility used in an industrial process.
ACGInstalled capacity
The maximum amount that can be contained or produced.
ACHWarehouse size
The relative bigness of a structure in which things are temporarily stored.
ASWWeight ascertained
[4240] Endorsement of the true weight (mass) as ascertained or verified by the railway (CIM 81).
ASXSupplemental tariff classification quantity
Supplemental quantity reportable for a tariff number.
ASY1st specified tariff quantity, general rules of interpretation 3(c) or 3(b)
The first reportable quantity associated with a tariff number for goods classified under general rules of interpretation 3(b) or 3(c).
ASZ2nd specified tariff quantity, general rules of interpretation 3(c) or 3(b)
Secondary reportable quantity associated with a tariff classification for goods classified under harmonized tariff schedule general rules of interpretation 3(b) or 3(c).
ATA3rd specified tariff quantity, general rules of interpretation 3(c) or 3(b)
Third reportable quantity associated with a tariff classification for goods classified under harmonized tariff schedule general rules of interpretation 3(b) or 3(c).
ATBShowroom size
The relative bigness of a room used for display.
ATCReserves
Measurement of reserves maintained.
ATDHeight reference point
The point from which the reference height is determined.
ATEAvailable for cultivation
The purpose is to measure the availability for cultivation.
CHChemistry
The given measurement value identifies the amount or percentage of a specific chemical within a substance.
CHWChargeable weight
The weight on which charges are based.
CNCore notch dimensions
CSCore size
CTCounts
DENDensity
Code to indicate the mass of a commodity per unit of volume.
DTDimensional tolerance
Possible range of values for a specified measurement dimension of a product, material or package.
DVDiscrete measurement value
The measurement specified is separate and distinct from other measurements.
DXDimension used in price extension
Description to be provided.
ENEnvironmental conditions
The data values to be reported reflect the environmental conditions surrounding a situation including but not limited to test environments.
FOFootage
Description to be provided.
IVInterpolated value
Description to be provided.
LAOVessel overall length
Total overall length of the vessel.
LCLimited weight/size coils
Description to be provided.
LGLLength limitations
Indicates that value/range information is understood as length limitation.
LLLift limitation
A measurement indicating lift capacity limitations.
LMTLoading meters
The length in a vehicle, whereby the complete width and height over that length is needed for the goods.
PALPayload
The revenue-producing load carried by a means of transport.
PCParting cut (sawcut)
Description to be provided.
PDPhysical dimensions (product ordered)
Specified measurement dimensions refer to physical dimensions of a product, material or package.
PLPackage limitations
A measurement indicating limitations associated with the package.
PLLPlatform limitation
A measurement indicating limitations in relation to a platform.
RLReceiving facility limitations
Specified measurement dimensions are provided as a result of limitations or restrictions related to the physical dimensions of a product, material or package at the reception point.
SEProperty specification
Indicates that the data to follow are target specifications.
SHShipping tolerance
Tolerances related to shipping.
SMShade
Description to be provided.
SOStorage limitation
A measurement indicating limitation in relation to storage.
SRSurface roughness
STSurface treatment
SUSurface
Surface area of an object.
SVSpecification value
A measurable item characteristic specified by the buyer, seller or third party.
TETemperature
TLTransportation equipment limitations
A measurement indicating limitations in relation to transportation equipment.
TRTest result
Indicates that the data to follow is the test result measurements.
VOLVolume
Size or measure of anything in three dimensions.
WTWeights
WXWeight used in price extension
Description to be provided.

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.