| AAA||Line item measurement|
Line item measurement specified by the Food and Drug Administration.
| AAB||Transport conditions for delivery to distribution centre|
Specified measurements refer to transport conditions for delivery to a distribution centre.
| AAC||Retail container size|
Size of a retail container in terms of volume.
| AAD||Other US Government agency application|
Measurement to be used by/for other United States government agencies.
 To specify the value of a measurement.
| AAF||Customs line item measurement|
The measurement of a consignment or part for customs purpose.
| AAG||Alcohol content|
The measurement of the alcohol content.
| AAH||Dimensions total weight|
The total weight of an identified dimension.
| AAI||Item weight|
Weight at line item level.
| AAJ||Visa quantity|
Measurement reportable for visaed merchandise.
| AAK||Licence (quantity deducted)|
Quantity to be written off from the total license amount.
| AAL||Cargo loaded|
Total tonnage of cargo loaded onto the conveyance.
| AAM||Cargo discharged|
Total tonnage of cargo unloaded from the conveyance.
| AAN||Weight of conveyance|
Tonnage of conveyance.
| AAO||Conveyance summer dead weight|
Registered summer dead weight total tonnage of the vessel.
| AAP||Containerized cargo on vessel's weight|
Total weight of containerized cargo on vessel.
| AAQ||Non-containerized cargo on vessel's weight|
Total weight of non-containerized cargo on vessel.
| AAR||1st specified tariff quantity|
Primary reportable quantity associated with a tariff number.
| AAS||2nd specified tariff quantity|
Secondary reportable quantity associated with a tariff number.
| AAT||3rd specified tariff quantity|
Third reportable quantity associated with a tariff number.
Commodity/product shipped or sold in discrete individual containers which may be accumulated in a larger package.
Physical measurement of a person.
Accuracy of the measurements being sent.
| AAX||Consignment measurement|
Measurement related to a consignment; to be specified by the measurement code dimension value.
| AAY||Package measurement|
Measurements of package.
| AAZ||Handling unit measurement|
Measurements of handling unit.
| ABA||Unit of measure used for ordered quantities|
The unit of measure in which ordered quantities are expressed.
| ABB||Transport conditions for delivery to market|
Specified measurements refer to transport conditions for delivery to the market.
| ABC||Storage conditions to guarantee product freshness until|
The number of air exchanges per hour.
| ABJ||Original unit of issue|
A code identifying the original unit of issue.
| ABK||External dimension|
The outer measurement of the referenced item or package.
| ABL||Internal dimension|
The inner measurement of the referenced item or package.
| ABM||Test piece dimensions|
The size of the test piece that was tested.
| ABN||Average reading|
Average reading of the test being reported on.
| ABO||Comparison price measurement|
A measurement used for comparison pricing purposes.
| ABP||Unit of measure per unit of issue|
Provides the unit of measurement which is to be used for a given unit of issue.
| ABQ||Air flow|
The movement of air.
| ABT||Supplementary unit|
Supplementary unit referring to the measurement reported.
Maximum number or amount.
| ABV||Unit of time|
The specification of a specific unit of time.
| ABW||Unit of measure used for invoiced quantities|
Unit of measure of invoiced quantity.
| ABX||Usable or consumable content|
Measurement of usable or consumable contents.
| ABY||Payment cycle|
Measurement of the period of time over which payment occurs.
| ABZ||Plot size|
The relative bigness of a plot or an allotment of land.
| ACA||Space occupied|
Space taken up or filled.
| ACB||Building size|
The relative bigness of a permanent fixed structure forming an enclosure.
| ACC||Office size|
The relative bigness of a room or building used for clerical or similar work.
| ACD||Area damaged|
The size of an area that was damaged.
| ACE||Land size|
The relative bigness of an expanse of ground.
| ACF||Industrial plant size|
The relative bigness of a factory or facility used in an industrial process.
| ACG||Installed capacity|
The maximum amount that can be contained or produced.
| ACH||Warehouse size|
The relative bigness of a structure in which things are temporarily stored.
| ACI||Volume to dispose|
Volume to get rid of.
| ACJ||Volume to produce|
Volume which will be generated.
| ACK||Commodity size|
The size name, dimensions, or weight of the commodity.
| ACL||Free surface moment|
Effects of force caused by free-surface effects in partly-filled tanks.
| ACM||Estimated gross weight|
Estimated weight (mass) of goods, including packing.
| ACN||Fat content|
A code to indicate the fat content of a product, e.g. cheese.
| ACO||Test measure value|
Specification of a value which was measured for test purposes.
Dimensions or magnitude of an object.
| ACQ||Maximum dimension using a functionality|
Maximum dimension of an article using a functionality (e.g. extendable sofabed).
| ACR||Minimum dimension using a functionality|
Minimum dimension of an article using a functionality (e.g. folding chair).
| ACS||Mattress dimension|
Dimension of a mattress, i.e. not the total dimension of the bed frame.
| ACT||Seat dimension|
Seat dimension of a chair etc., not total dimension.
| ACU||Maximum storage capacity|
Code qualifying the purpose of the measurement, to indicate the maximum storage capacity
| ACV||Quantity to be generated|
Code qualifying the purpose of the measurement, to indicate the quantity to be generated
| ASX||Supplemental tariff classification quantity|
Supplemental quantity reportable for a tariff number.
| ASY||1st specified tariff quantity, general rules of|
| ASZ||2nd specified tariff quantity, general rules of|
| ATA||3rd specified tariff quantity, general rules of|
| ATB||Showroom size|
The relative bigness of a room used for display.
Measurement of reserves maintained.
| ATD||Height reference point|
The point from which the reference height is determined.
| ATE||Available for cultivation|
The purpose is to measure the availability for cultivation.
| ATF||Quantity received|
Code qualifying the purpose of the measurement, to indicate the quantity received
| ATG||Quantity retained|
Code qualifying the purpose of the measurement, to indicate the quantity retained
| ATH||Quantity to be delivered|
Code qualifying the purpose of the measurement, to indicate the quantity to be delivered
| ATI||Quantity to be delivered|
Code qualifying the purpose of the measurement, to indicate the quantity to be delivered
| best||before date|
Specified measurements refer to storage conditions to guarantee the product freshness until best before date.
The given measurement value identifies the amount or percentage of a specific chemical within a substance.
| CHW||Chargeable weight|
The weight on which charges are based.
| CN||Core notch dimensions|
The notch dimensions of a core.
| CS||Core size|
The size of a core.
The measurement is counts.
Code to indicate the mass of a commodity per unit of volume.
| DT||Dimensional tolerance|
Possible range of values for a specified measurement dimension of a product, material or package.
| DV||Discrete measurement value|
The measurement specified is separate and distinct from other measurements.
| DX||Dimension used in price extension|
Dimension will be used in conjunction with price extension.
| EN||Environmental conditions|
The data values to be reported reflect the environmental conditions surrounding a situation including but not limited to test environments.
Length or distance in feet.
| interpretation||3(c) or 3(b)|
Third reportable quantity associated with a tariff classification for goods classified under harmonized tariff schedule general rules of interpretation 3(b) or 3(c).
| IV||Interpolated value|
The value based on interpolation.
| LAO||Vessel overall length|
Total overall length of the vessel.
| LC||Limited weight/size coils|
Measurement identifying weight or size limit of coils.
| LGL||Length limitations|
Indicates that value/range information is understood as length limitation.
| LL||Lift limitation|
A measurement indicating lift capacity limitations.
| LMT||Loading meters|
The length in a vehicle, whereby the complete width and height over that length is needed for the goods.
The revenue-producing load carried by a means of transport.
| PC||Parting cut (sawcut)|
Cut identifying parts of an item probably for separation.
| PD||Physical dimensions (product ordered)|
Specified measurement dimensions refer to physical dimensions of a product, material or package.
| PL||Package limitations|
A measurement indicating limitations associated with the package.
| PLL||Platform limitation|
A measurement indicating limitations in relation to a platform.
| RL||Receiving facility limitations|
Specified measurement dimensions are provided as a result of limitations or restrictions related to the physical dimensions of a product, material or package at the reception point.
| SE||Property specification|
Indicates that the data to follow are target specifications.
| SH||Shipping tolerance|
Tolerances related to shipping.
The degree to which a colour is mixed with black or is decreasingly illuminated.
| SO||Storage limitation|
A measurement indicating limitation in relation to storage.
| SR||Surface roughness|
The measurement of roughness of a surface.
| ST||Surface treatment|
The attribute being measured is the surface treatment.
Surface area of an object.
| SV||Specification value|
A measurable item characteristic specified by the buyer, seller or third party.
The measured attribute is temperature.
| TL||Transportation equipment limitations|
A measurement indicating limitations in relation to transportation equipment.
| TR||Test result|
Indicates that the data to follow is the test result measurements.
Size or measure of anything in three dimensions.
The measured attribute is weight.
| WX||Weight used in price extension|
Weight will be used in conjunction with price extension.