6313 Measured attribute code
Code specifying the attribute measured.
- String (AN)
- Min 1 / Max 3
Code Description A Consolidated weightThe measured consolidated weight. AAA Net weight Weight of goods including any packaging that normally going with the goods. AAB Goods item gross weight Weight (mass) of goods including packing but excluding the carrier's equipment. AAC Total net weightTotal weight of goods excluding packaging. AAD Consignment gross weight Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment. AAF Net net weight Weight (mass) if goods without any packaging. AAG Stern thrustForce exerted by a thruster installed at the stern of a vessel. AAH Bow thrustForce exerted by a thruster installed at the bow of a vessel. AAI Hydrate content of an alcoholic product at bottlingThe hydrate content of an alcoholic product at the moment of bottling. AAJ Number of units per palletThe number of units contained on a pallet. AAK Fat contentAn indication of the fat content of a product. AAM Transport means gross weight The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969. AAN Net tonnage of the vessel The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969. AAO HumidityDegree of moisture. AAP VoltageElectromotive force, or difference of electronic potential between two points. AAQ Power consumptionValue of energy consumption. AAR Heat dissipationMeasurement of the rate of dispersal of heat. AAS Air flowMeasurement of the flow of air. AAT Shock impactMeasurement of the impact of a shock. AAU Operative temperatureTemperature identified system or process works according to specifications. AAV Non operative temperatureTemperature identified system or process does not work according to specifications. AAW Gross volumeThe volume unadjusted for factors such as temperature or gravity. AAX Net volumeThe volume after adjustment for factors such as temperature or gravity. AAY Water contentWater content in product. AAZ Tensile stressThe measured tensile stress. ABA FibrosityThe measured fibrosity. ABB Gauge lengthThe measured gauge length. ABC RadiusThe measured radius. ABD StraightnessStraightness of the item. ABE StrainThe measured strain. ABF Item width when unrolledThe width of an item when unrolled. ABG Item length when unrolledThe length of an item when unrolled. ABH Item area when unrolledThe area occupied by an item when unrolled. ABI Original wortMeasure of the malt and hops content of beer, before fermentation has taken place. ABJ VolumeThe amount of air space taken up by the entity identified in the 6311 qualifier. ABK AngleThe angle of an object. ABL Peg hole horizontal distance from package leftmost edgeHorizontal distance from the left most edge of the package to the center of the hole into which the peg is inserted. ABM Peg hole vertical distance from package topVertical distance from the top of the package to the top of the hole into which the peg is inserted. ABN Number of layers per palletThe number of layers per pallet. ABO Product strengh, chemicalThe amount of the single active chemical ingredient within a product. ABP Product strength basis, chemicalAmount of product used as the basis for the specification of the chemical product strenght. ABS Item weightWeight at line item level. ABT Payload weight, maximumThe maximum weight of a payload. ABX Weight of conveyanceTonnage of conveyance. ABY Conveyance summer dead weightRegistered summer dead weight total tonnage of the vessel. ABZ Containerized cargo on vessel's weightTotal weight of containerized cargo on vessel. ACA Non-containerized cargo on vessel's weightTotal weight of non-containerized cargo on vessel. ACE Ascertained weight Endorsement of the true weight (mass) as ascertained or verified. ACG Chargeable weightThe weight on which charges are based. ACN Estimated gross weightEstimated weight (mass) of goods, including packing and excluding carrier's. ACP Estimated volumeEstimated size or measure of anything in three dimensions. ACS Vessel overall lengthTotal overall length of the vessel. ACV Loading meters (6042) (6044) The length in a vehicle, whereby the complete width and height over that length is needed for the goods. ACW Number of axlesNumber of axles of movable equipment or means of transport on wheels. ACX PayloadThe revenue-producing load carried by a means of transport. ADR Start position in the lengthThe starting position from the beginning of an item located in the length direction. ADS End position in the lengthThe end position from the beginning of an item located in the length direction. ADT Start position in the widthThe start position from the beginning of an item located in the width direction. ADU End position in the widthThe end position from the beginning of an item located in the width direction. ADV Start position in the thicknessThe start position from the beginning of an item located in the thickness direction. ADW End position in the thicknessThe end position from the beginning of an item located in the thickness direction. ADX Transport container actual filling weightActual filling weight of a transport container. ADY Transport container maximum capacityMaximum capacity of a transport container. ADZ Declared net weightThe declared net weight of a product or products used for invoicing, customs or transport purposes. AEA Loading heightMaximum height of products or packages loaded onto a given transportation device or equipment such as a pallet. AEB Stacking heightMaximum height up to which the same product or package may be placed one upon the other for storage purposes. AEC Calculated weightThe calculated weight of the item based on the ordered dimensions. AED FerriteThe chemical composition ferrite. AEE ImpurityThe impurity of the product i.e. the measurement of other chemical elements not normally appearing in a product. AEF Grain sizeThe grain size. AEG LanthanidesThe chemical element Lanthanides. AEH ElasticityThe value of the elasticity. AEI Drained weightThe weight of a product when all liquids used in the packaging of the product have been removed. AEJ GalliumMeasurement of the gallium component. AEK StrontiumMeasurement of the strontium component. AEL AreaExtent or measure of a surface. AEM Equipment storage limitationMaximum storage limit of the equipment. AEN Radioactive index of transportThe index of transport determines the maximum radiation level at a distance of 1m from the external surface. AEO RadioactivityActivity of radioactive material. AEP Average gross weightWeight which is the outcome of the division of the total gross weight by the number of units. AEQ Forward draftDepth of water from the surface of water to the bottom of the vessel measured at the draft mark of the bow. AER After draftDepth of water from the surface of water to the bottom of the vessel measured at the draft mark of the stern. AES AcidityThe quality, state, or degree of being acid. AET Transport equipment gross weight Weight of a transport equipment including the cargo and carrier's equipment. AEU Total transport equipment gross weightTotal weight of all transport equipment including the cargo and carrier's equipment. AEV Acidity of juiceAcid measurement of juice. AEW PenetrometryMeasurement of force required to drive a standard penetrating stamp. AEX DurofelMeasurement of the elastic force using a standard penetrating stamp. AEY Juice weight per 100 gramsMeasurement of weight of juice, based on 100 grams of the entire weight. AEZ Fruit skin colourMeasurement of the colouring of the epidermis of a fruit. AF Angle of bendThe measured angle of bend. AFA Fixed incremental measurementThe measurement of the fixed increment. AFB Durofel D10Measure of the elastic force of the pulp of a fruit. It is measured with a penetrating stamp with diameter 10. AFC Durofel D25Measure of the elastic force of the pulp of a fruit. It is measured with a penetrating stamp with diameter 25. AFD Durofel D50Measure of the elastic force of the pulp of a fruit. It is measured with a penetrating stamp with diameter 50. AFE Maximum stacking weightThe maximum weight which may be stacked upon a product or package without the product or packaging being crushed. AFF Gross measure cubeThe total cubic space occupied by an item, taking into account any protruding components, arrived at by multiplying the maximum length, width and height. AFG Percentage fat content in dry matterThe percentage of fat content in dry matter. AFH Saccharometric contentMeasurement of the sugar content of a solution. AFI Hydrate content of an alcoholic product after bottlingThe hydrate content which occurs in an alcoholic product after bottling. AFJ Anhydrous contentThe non-water content. AFK Certified weightWeight which has been certified. AFL FreeboardThe vertical distance between the waterline and the upper edge of the deck line. AFM Maximum vessel draughtThe depth of water needed to float the ship (Maximum vessel draught according to Load Line Certificate IMO, MSC/Circ. 920 15 June 1999). AFN Net explosive weightMass of the explosive part or substance of goods without any packing. AFO Radioactive criticality safety indexA number, assigned to fissile material i.e. material capable of sustaining a nuclear chain reaction, which is used to provide control over the accumulation of packages containing such material. AFP Waste currently on boardAmount of waste on board at the moment of the notification. AFQ Waste to be delivered at waste reception facilityAmount of waste to be delivered to a waste reception facility, e.g. in the port of call. AFR Waste to be generated until next port of call, estimatedEstimated amount of waste to be generated between creation of the current notification and arrival in the next port of call, irrespective of use of incinerator or compactor or disposal at sea. AFS Waste remaining on board at departureAmount of waste remaining on board when leaving the port of call. AFT Colour depthThe number of distinct colours represented, e.g. in an image or in a display. AFU Colour depth, maximumThe maximum number of distinct colours that can be represented, e.g. in an image or in a display. AFV Image resolutionThe level of detail of an image. AFW Device resolution, maximumThe maximum level of detail produced by a device. AFX Acoustic absorption coefficientThe portion of sound energy a surface absorbs, measured at different frequencies. B Billed weightThe measured billed weight. BL Breaking loadThe measured breaking load. BMY PlatinumThe measurement of the platinum component. BMZ SilverThe measurement of the silver component. BNA ListThe leaning or inclination of a vessel expressed in degrees port or starboard. BNB TrimThe condition of a vessel with reference to its longitudinal axis. BNC Free waterThe volume of water present in a container that is not in suspension in the contained liquid. BND BandsThe measured bands. BNE API (American Petroleum Institute) gravityThe relative density of petroleum liquids as specified by a standard developed by the API. BNF Petroleum gross observed volumeThe total volume of all petroleum liquids and sediment and water, excluding free water, at observed temperature and pressure. BNG Petroleum gross standard volumeThe total volume of all petroleum liquids, sediment, and water excluding free water, corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute relative density, or density to a standard temperature. BNH Volume varianceThe change in the volume measurement. BNI Petroleum net standard volumeThe total volume of all petroleum liquids, excluding sediment and water and free water, corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute gravity relative to density or to a standard temperature. BNJ Material on-board quantity, after dischargeThe material in vessel tanks, void spaces, and pipelines after discharge. BNK Petroleum total calculated volumeThe total volume of all petroleum liquids, sediment and water corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute (API) gravity, relative density, or density to a standard temperature. BNL Petroleum total observed volumeThe total volume of all petroleum liquids, sediment and water and free water at observed temperature and pressure. BNM Innage gauge distanceThe measured distance from the surface of the liquid to a fixed datum plate or to the tank bottom. BNN Petroleum net standard weightThe total weight of all petroleum liquids excluding sediments, water and free water. BNO Sediment and water in petroleumThe measurement of non-hydrocarbon solid material and water in suspension in petroleum liquid. BNP Observed reference height, tankThe observed distance from the tank bottom or datum plate to the established reference point. BNQ Reference height, tankThe measured distance from the tank bottom or datum plate to the established reference point. BNR Ullage gauge distanceThe measured distance from the cargo liquid surface to the reference point. BNS Trim correctionThe correction applied to the observed gauge or observed volume when a vessel is not on an even keel. BNT Bow to bridge distanceThe distance between the bow and the bridge of a vessel. BNU Peg hole numberUsed to identify the peg hole if more than one hole is present in the product or packaging. BNV Number of inner packsIndicates the number of non coded physical groupings (inner packs) of next lower level trade items within the current trade item level. BNW Number of next level trade items within inner packThe number of next lower level trade items contained within the physical non-coded grouping (inner pack). BNX Number of trade items per pallet layerThe number of trade items contained on a single layer of a pallet. BNY Packed items layer heightThe height of a single layer of packed items. BNZ Packing material weight, skin tight coveringThe weight measurement of the packing material used for skin tight covering (e.g. when packaging prepared meats, poultry, cheese, and other food products). BR BrightnessThe measured brightness. BRA BrakesThe measured brakes. BRB Components labelled for recycling percentagePercentage of trade item components that clearly label how to facilitate product disassembly and recycling. BRC Renewable plastic components percentage, by net weightThe percentage of the plastic components only made from rapidly renewable plant-based material by net weight of product. BRD Clamp pressure, requiredThe pressure that should be applied by a clamp. BRE BreakThe measured break. BRF Ascertained volumeEndorsement of the true volume as ascertained or verified. BRG Unit weightThe weight of a unit. BRH Total volumeTotal volume of goods and/or parcels. BRI Unit volumeThe volume of a unit. BRJ Vertical center of gravityDistance of vertical center of gravity relative to item's base. BRK Maximum allowable transport stacking weightMaximum weight allowed to be stowed on top of an item during transport. BRL Carbon DioxideMeasurement of the carbon dioxide (C02) component. BRM Number of base units per palletThe number of base units contained on a pallet. BRN Colony forming unitMicro-organism colonies that are to be counted under determined conditions. BRO Diluted liquid volumeThe volume of liquid which results after a dilution agent has been added, e.g. undiluted orange juice of 200ml, after dilution with water the volume of diluted liquid equals 1 litre. BRP Energy efficiencyA measurement of the energy efficiency of an article. BRQ Number of layersNumber of layers of a product or products within a package, container, etc. BRR Maximum demandThe highest demand recorded during the period of recording of usage of the supply. BRS Number of pallet placesThe number of pallet places needed to store or to transport pallets (can be stacked). BRT Package net measurement, cubedAn indication of the net cubed measurement of a package. BRU Power factorThe ratio of the power dissipated (active power in kW) to the total power (which is the product of the input volts times amps given in kVa). When equipment which uses reactive power is being operated the power factor will be less than one. BRV Stacking factor excluding bottom itemMaximum number of identical items stackable on top of item. BS Breaking strengthThe measured breaking strength. BSW Breaking strength wetThe measured breaking strength when wet. BSX Step sizeAn indication of measurements in which options contained within a Customer Specific Article are available, e.g. 10 metre planks of wood may be sold in step sizes of 2 metres. BSY Number of units per packageThe number of identified units per package. BSZ Number of units per layerNumber of units of a product or package within one layer of a package, container, etc. BTA Weight per running metreA code used to indicate the weight per running metre of floor coverings over floor area. BTB Weight per square metreA code used to indicate the weight per square metre of floor coverings over floor area. BTC Acidity of meatThe meat's acid quality or condition. BTD Slaughtering weightWeight immediately after slaughter. BTE Stacking factor including bottom itemMaximum number of items stackable upon each other, including the bottom item. BTF Number of units in the width of a layerNumber of units of a product or package which make up the width of a layer in a package, container, pallet, etc. BTG Number of units in the depth of a layerNumber of units of a product or package which make up the depth of a layer in a package, container, pallet, etc. BTH Nestable percentageExtent expressed as a percentage to which an item can be nested within an identical item, e.g. paper cups. BTI Gross weight including carrier's equipmentWeight (mass) of goods including packaging and the carrier's equipment. In this context 'carrier's equipment' means any material resources necessary to facilitate the transport and handling of the goods without having the ability to move by its own propulsion, e.g. pallet, container, etc. BTJ Sugar contentThe rate of sugar. BTK Self-accelerating polymerization temperature (SAPT)The lowest temperature at which polymerization may occur for a substance as packed for transport. BTL Self-accelerating decomposition temperature (SADT)The lowest temperature at which self-accelerating decomposition may occur for a substance as packed for transport. BTM Control temperatureThe controlled transport temperature to avoid decomposition of self-reactive substances and organic peroxides. BW Basis weight(6030) The measured basis weight. CHN ChangeThe measured change. CHO Emergency temperatureThe temperature at which emergency response is required for self-reactive substances and organic peroxides. CM ColourThe measured colour. CT Contents of packageIn combination with the other data elements of the actual segment this code indicates the measured content of a package. CV Commercial weightItem weight considering its maximum possible humidity. CZ Core lengthTo specify length of core on which product is to be placed. D Destination weight agreementThe agreed weight of despatched goods whose weight may change during transport. DI DiameterDiameter of an article. DL Delta value LThe measured delta value L. DN DensityThe measured density. DP DepthThe measured depth. DR DenierThe measured fineness of a material. DS Distance between pointsThe measured distance between points. DW Width, boxcar doorThe measured width of a boxcar door. E Estimated new weightThe measured estimated new weight. EA ElongationThe measured elongation. F Deficit weightThe measured deficit weight. FI Filament countUsed e.g. in textile, print industries. FL Longitudinal flatnessThe measured longitudinal flatness. FN FlatnessThe measured flatness. FV Transverse flatnessThe measured transverse flatness. GG GaugeThe measured gauge. GW Gross weight, maximumThe measured maximum gross weight. HF HardnessThe measured hardness. HM Height, maximumThe measured maximum height. HT Height dimensionNumeric value of height. IB Impact energyThe measured impact energy. ID Inside diameterThe measured inside diameter. L Legal weight The measured legal weight. LM Length, maximumThe measured maximum length. LN Length To specify the value of a length dimension. LND Lost endThe measured lost end. M Minimum weightThe measured minimum weight. MO MoistureMeasurement application is the moisture content of the item. MW Maximum weightThe measured maximum weight. N Actual net weightThe actual weight of the goods excluding packaging. OD Outside diameterThe measured outside diameter. PRS Pre stretchMeasurement identifying the amount an item has been stretched prior to use. PTN Per tonneA measurement per tonne. RA Relative humidityThe measured relative humidity. RF ResistivityThe measured resistivity. RJ Rockwell CHardness in the Rockwell C scale. RMW Ream weightMeasurement indication for paper. RP Reduction of areaThe measured reduction of area. RUN Run (process)The measured run (process). RY RatioThe measured ratio. SQ Shipped quantityThe measured shipped quantity. T Tare weight(6052) (6156) Weight excluding goods and loose accessories. TC TemperatureA measurement in relation to temperature. TH ThicknessThe measured thickness. TN Time periodMeasurement of a specific length of time. TT TimeThe measured time. VGM Transport equipment verified gross mass (weight)The gross mass (weight) of the transport equipment verified according to SOLAS Chapter VI, Regulation 2, paragraphs 4-6. VH Height, van doorThe height of the door of a van or container. VW Width, van doorThe width of the door of a van or container. WA Weight per unit of areaThe weight per unit of an area. WD Width dimensionNumeric value of width. WM Width, maximumThe maximum distance from side to side. WU Weight per unit of lengthThe weight per unit of length. XH Side height, flat bed with removable sidesThe height of the removable sides of a flat bed truck. XQ SquarenessThe measured squareness. XZ Spool sizeThe measured spool size. YS Yield stressThe measured yield stress. ZAL AluminiumThe measured chemical element aluminium. ZAS ArsenicThe measured chemical element arsenic. ZB BoronThe measured chemical element boron. ZBI BismuthThe measured chemical element bismuth. ZC CarbonThe measured chemical element carbon. ZCA CalciumThe measured chemical element calcium. ZCB ColumbiumThe measured chemical element columbium. ZCE CeriumThe measured chemical element cerium. ZCL ChlorineThe measured chemical element chlorine. ZCO CobaltThe measured chemical element cobalt. ZCR ChromiumThe measured chemical element chromium. ZCU CopperThe measured chemical element copper. ZFE IronThe measured chemical element iron. ZFS Iron plus siliconThe measured substance iron plus silicon. ZGE GermaniumThe measured chemical element germanium. ZH HydrogenThe measured chemical element hydrogen. ZK PotassiumThe measured chemical element potassium. ZMG MagnesiumThe measured chemical element magnesium. ZMN ManganeseThe measured chemical element manganese. ZMO MolybdenumThe measured chemical element molybdenum. ZN NitrogenThe measured chemical element nitrogen. ZNA SodiumThe measured chemical element sodium. ZNB NiobiumThe chemical element niobium. ZNI NickelThe measured chemical element nickel. ZO OxygenThe measured chemical element oxygen. ZP PhosphorusThe measured chemical element phosphorus. ZPB LeadThe measured chemical element lead. ZS SulphurThe measured chemical element sulphur. ZSB AntimonyThe measured chemical element antimony. ZSE SeleniumThe measured chemical element selenium. ZSI SiliconThe measured chemical element silicon. ZSL Silicium oxydThe measured substance silicium oxyd. ZSN TinThe measured chemical element tin. ZTA TantaliumThe measured chemical element tantalium. ZTE TelluriumThe measured chemical element tellurium. ZTI TitaniumThe measured chemical element titanium. ZV VanadiumThe measured chemical element vanadium. ZW TungstenThe measured chemical element tungsten. ZWA Waste contentThe measured waste content. ZZN ZincThe measured chemical element zinc. ZZR ZirconiumThe measured chemical element zirconium. ZZZ Mutually definedA code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.