235 Product/Service ID Qualifier

Code identifying the type/source of the descriptive number used in Product/Service ID (234).

Type
Identifier (ID)
Length
Min 2 / Max 2
Codes
CodeDescription
A1Plant Equipment Number
Item identifier is a plant equipment number
A2Department of Defense Identification Code
Item identifier is a Department of Defense ammunition code
A3Locally Assigned Control Number
Item identifier is a locally assigned control number used to catalog and manage material
A4Subsistence Identification Number
Item identifier is a brand-name resale subsistence item
A6Document Identification Code
Item identifier subclassifies the intended use of the transaction
A7Subline Item Number
A further subdivision of a contract or exhibit line item that identifies a specific part of that contract or exhibit line item
A8Exhibit Line Item Number
The line item of a document referenced in and appended to a procurement instrument which establishes a delivery requirement
A9Health Care Financing Administration National Standard Format Podiatry Codes
AAAmerican Trucking Associations Assembly
Assembly within the vehicle system that contains the causal part
ABAssembly
ACAggregation Code (Used to Consolidate Part Families)
ADAmerican Dental Association Codes
This association's membership consists of U.S. dentists. It sets standards for the dental profession
AESerial Item and Contribution Identifier (Defined in ANSI 239.56)
AHBillboards Commercial
AIAlternate ISBN
AJPiggyback Commercial
AKRefined Product Code
AMAllocation Methodology Identification Code
ANAsset Number
AOGAS*FLOW Product or Service Charge Code
APAmerican Trucking Associations Part
System within the vehicle that contains the causal part
ARARINC Part Number
ASRear Axle Serial Number
ATAssortability Code
AWWell Number
AXAssembly Lot Number
A serialization number identifying good's manufacturing location
AYAmerican Trucking Associations System
AZAxle Ratio
B1Volume Set
B2Library of Congress Code
B3Edition Code
B4Binding Code
B5Title Code
B6Author Code
B7Publisher Code
BABale Number
BBPrint Color Standard Reference
Customer decides after trial run of a print on a pre-dyed fabric a point of reference for the shade of the print color, light or darknes of the print; this reference then becomes a standard for the finisher to go by - as a customer orders fabric this code is used to identify to finisher the shade of the print on the fabric
BCSupplier Brand Code
BDBuyer Ground Shade Identifier
For each color there are various degrees of the color red for instance has degrees chinese red, fire engine red, etc; to each degree a symbol called ground shade is established by both the buyer and seller; to the buyer it might be fire engine red, whereas to the seller the same classification might have a different symbol; need to identify both in a purchase order
BEBuyer's Engineering Change Level Number
BFVendor Ground Shade Identifier
For each color there are various degrees of the color red for instance has degrees chinese red, fire engine red, etc; to each degree a symbol called ground shade is established by both the buyer and seller; to the buyer it might be fire engine red, whereas to the seller the same classification might have a different symbol; need to identify both in a purchase order
BGGround Shade Standard Reference
Buyer established shade reference at time first lot was dyed; this refers seller (dyer) back to a previous lot to match the shade
BHFinish/Hand Standard Reference
Fabrics can be finished in many types of finish: water repellent, Scotch Guard, etc.; within each finish a mill can create a degree of softness or hardness depending on how fabric should feel to the customer; this degree is assigned a reference number for reordering purposes
BLBrand/Label
BMBeam Number
BNBar-Coded Serial Number
BOBuyers Color
BPBuyer's Part Number
BSBill Subgroup Code
BTVolume Type Identification Code
BUBus Body Serial Number
BXBill Credit Code
CACase
CBBuyer's Catalog Number
CCCompatible Cut Number
CDMotor Vehicle-Line Designator
CEClass of Contract Code
CFChassis Serial Number
CGCommodity Grouping
CHCountry of Origin Code
CICommon Language Equipment Identifier (CLEI)
CJCurrent Procedural Terminology (CPT) Codes
Published by the AMA. It is a listing of descriptive terms and identifying codes for reporting medical services and procedures performed by physicians. The uniform language accurately designates medical, surgical, and diagnostic services, and thereby provides reliable communications among physicians, patients, and payers
CLColor
CMNational Retail Merchants Association Color Code
CNCommodity Name
COChemical Abstract Service (CAS) Registry Number
CPCarry-over Part Number
CQEquipment Code per COPAS standard
CRContract Number
CSService code per COPAS standard
CTContinuation (ID Number Spans Multiple Product ID Data Elements)
CUCut Number
CVCustomer Provided Equipment
The termination equipment being used will be provided by the customer
CYCustomer Company Registry Number
DEDesign Number
DGDiscount Grouping
DIDeposit Item Number
DLDye Lot Number
DNDie Number
DPDiscontinued Part Number
DRDrawing Revision Number
DXInternational Classification of Diseases Clinical Modification (ICD-9-CM) - Diagnosis
The International Classification of Diseases, Clinical Modification, is designated for the classification of morbidity and mortality information for statistical purposes and for the indexing of hospital records by disease and operations, for data storage and retrieval; this is a diagnosis code
DZDiagnosis Code Pointer
ECEngineering Change Level
EDEngine Displacement Identification
EIExpense Identifier
ELBuyer's Subline Item Number
A subset of a buyer's item number (e.g., the relationship of a contract subline item number to its corresponding contract line item number
EMEquipment Identification Number
Product identification number
ENEuropean Article Number (EAN) (2-5-5-1)
EPBuyer's End Product Number
EQEquipment Type
ESEngine Serial Number
EXExchanged Part, Assembly or Product
F1Catalog Number
Item identifier specifies a manufacturer's catalog that applies to an item
F2Technical Order Number
Item identifier specifies a technical order that applies to an item
F3Technical Manual Number
Item identifier specifies the technical manual listing the item
F4Series Identifier
An identification of equipments having the same basic design but not necessarily identical configurations (within the equipment model)
F5Obligation Authority Number
Item identifier specifies the funding authority related to an expense or procurement
F7End-Item Description
Item identifier describes an end-item associated with the use of the required material
F8Next Higher Used Assembly
Item identifier describes the next higher assembly associated with the use of the required material
FAFailed Subassembly Serial Number
FBForm Number
FFFifth Wheel Serial Number
FIFinish Number
FLFinish Lot Number
FMFailed Subassembly Model Number
FNFinal Test Lot Number
A serialization number identifying the final test event of goods
FPFabric Pieces Per Roll
FSNational Stock Number
FTFederal Stock Classification
FWNew Microcode
Microcode: 1) One or more microinstructions, 2) A code, representing the instructions of an instruction set, that is implemented in a part of storage that is not program-addressable
GCGrade Code
GDGrain Direction
GKGlider Kit
In the automotive industry a ``glider kit'' is the term for an incomplete vehicle with a vehicle identification number assigned and is typically manufactured without an engine, transmission, driveline, or rear axle(s). Often the glider kit is used as the replacement shell for a vehicle involved in an accident
GNGrade Name
GRGear Ratio
GSGeneral Specification Number
GUVolume Usage Identification Code
HCHealth Care Financing Administration Common Procedural Coding System (HCPCS) Codes
HCFA coding scheme to group procedure(s) performed on an outpatient basis for payment to hospital under Medicare. Primarily used for ambulatory surgical and other diagnostic departments
HDInternational Harmonized Commodity Code
For customs authority purposes, the class and description of a subject part or material item per harmonized agreements on tariff commodity codes
HIHIBC (Health Care Industry Bar Code)
HNHeat Number
IAInformation Media Type
IBInternational Standard Book Number (ISBN)
ICInterior Color Number
IDInternational Classification of Diseases Clinical Modification (ICD-9-CM) - Procedure
The International Classification of Diseases, Clinical Modification, is designated for the classification of morbidity and mortality information for statistical purposes and for the indexing of hospital records by disease and operations, for data storage and retrieval; this is a procedure code
IMImprint (Trademark Code of Subsidiary)
INBuyer's Item Number
IPGAS*FLOW Invoice Posting Code
ISInternational Standard Serial Number (ISSN)
ITBuyer's Style Number
IWInterchangeability Code
Air Transport Association code specifying the interchangeability level among components
IZBuyer's Size Code
JNJob Number
JPPackage Type Code
Packaging method used for manufacturer product
JSJob Sequence Number
KAEngineering Data List
KBData Category Code
KPKanban Plan Number
LCLaboratory Test Condition Code
LGLift Gate Serial Number
LSLoad Sequence
LTLot Number
LULot Pricing Unit Number
MAMachine Number
MBMeasurement Type Code
MCMortgage Credit Data Order Type
MDMethod of Delivery Code
MFManufacturer
MGManufacturer's Part Number
MIMortgage Insurance Product Code or Number
MMMotor Equipment Manufacturing Association (MEMA) Product Type Code
MNModel Number
MOMovement Type Code
MSMilitary Specification (MILSPEC) Number
MTMajor Product/Material/Machine Type
N1National Drug Code in 4-4-2 Format
4-digit manufacturer ID, 4-digit product ID, 2-digit trade package size
N2National Drug Code in 5-3-2 Format
5-digit manufacturer ID, 3-digit product ID, 2-digit trade package size
N3National Drug Code in 5-4-1 Format
5-digit manufacturer ID, 4-digit product ID, 1-digit trade package size
N4National Drug Code in 5-4-2 Format
5-digit manufacturer ID, 4-digit product ID, 2-digit trade package size
NCNational Corporate Cash Management Association Service Code
NDNational Drug Code (NDC)
NHNational Health Related Item Code
NRNon-resaleable item (excluding deposit) number
NUNational Uniform Billing Committee (NUBC) UB92 Codes
NWNew Replacement Part or Assembly Defective
NZCombined NCCMA/Bank Service Code
OAOld UPC/EAN Case Code
OBOld UPC/EAN Multipack Code
OCOld UPC/EAN Consumer Package Code
ODOld UPC/EAN Module Code
OEOriginal Equipment Number
OFOld Common Language Equipment Identifier (CLEI) Code
Old Common Language Equipment Identifier (CLEI) codes are distinctive codes that provide a standard method of identifying telecommunications equipment or products in a uniform feature-oriented language
OGOld Microcode
Microcode: 1) One or more microinstructions, 2) A code, representing the instructions of an instruction set, that is implemented in a part of storage that is not program-addressable
OHOpposite-Hand Part Number
OIOptical Industry Product Code
OLOptical Cable Code
ONCustomer Order Number
OOOutside Production Operation Sheet Number
The specific engineering level or release to be used for the manufacture of the material being procured
OPObsolete Part Number
P1Petroleum Accountants Society of Canada Operating and Maintenance Code - Goods and Services Tax Not Applicable
P2Petroleum Accountants Society of Canada Capital Expenditure Code - Goods and Services Tax Not Applicable
P3Petroleum Accountants Society of Canada Tubular Code
P4Petroleum Accountants Society of Canada Non-Tubular Code
PAPattern Number
PBPetroleum Accountants Society of Canada Operating and Maintenance Code - Goods and Services Tax Forwarded
PCPrime Contractor Part Number
PDPart Number Description
PEPieces in Roll
PFPetroleum Accountants Society of Canada Capital Expenditure Code - Goods and Services Tax Forwarded
PGPackaging Specification Number
PHProperty and Casualty Service Code
PIPurchaser's Item Code
PJProduct Date Code (A code indicating the period during which a product was manufactured.)
PKPackaging Drawing
PLPurchaser's Order Line Number
PMNumber of Positions on Machine
PNCompany Part Number
POPurchase Order Number
PPAir Transportation Association Proprietary Rights Code
Primary procurement source for the subject part number and the relationship of proprietary rights to the originator of the data
PQProduct ID Attribute Code
PRProcess Number
PSPosition
PTPrint or Drawing
PUPart Reference Number
Often on a part or subassembly drawing there is a reference number shown that is not a part number but may refer to a set of notes for use in fabrication, assembly, or in repairing the item; it may refer to a physical location within the product, such as location of a particular part on a truck engine, or to a reference to a circuit location on an electronic assembly
PVAdvertising Package Identification Code
PWPart Drawing
PYOperator Assigned Property Identification
Number assigned by the operator to the physical property where the drilling is conducted. The number is used to identify the product or service for which the joint partner is being billed
PZProduct Change Notice Number
R1Replacement Subassembly Model Number
R2Replacement Subassembly Serial Number
RAReturn Code
RBNational Uniform Billing Committee (NUBC) UB82 Codes
RCReturnable Container No.
RDReel Number
REReefer Serial Number
RFRepair From Product Code
Identifies a broken product that is to be used in a repair process to create a new product with different attributes
RKRack Number
RNRelease Number
RORoll Number
RPReplaced Part Number
RRReplacement Product No.
RSSet Number
RTReel Type
RURun Number
RVRepair Tag Number
RWRelative Value Units
RYRecord Keeping or Model Year
SASchematic Diagram Reference Number
SBSubmission Number
A sequential number indicating the number of times a lot has been submitted for a certain test event
SCSeller's Date Code
SDSupplier Company Registry Number
SESection Print Number
SFSurface Finish
SHService Requested
A numeric or alphanumeric code from a list of services available to the customer
SIStandard Industrial Classification Code
SKStock Keeping Unit (SKU)
SLSeller's Lot Number
SMNational Retail Merchants Association Size Code
SNSerial Number
SPSuperseded Purchase Order Number
When moving material from one customer to another, the material is being taken off of the Superseded P.O. and put on a new purchase order number. This will allow tracking of the material to the original P.O. Number when the superseded purchase order number is used to specifically identify the item
SQRoll Sequence Number
SRSubstitute Product Number
SSSuperseded Part Number
STStyle Number
SUSide Up/Side Down
SVService Rendered
SWStock Number
SZVendor Alphanumeric Size Code (NRMA)
TAPipeline Transaction Code
TCTelecommunications Circuit ID
TITrade In Identifier
TMTelephone Industry Manufacturer Code
TNRailroad-Owned Unit Train Number
Railroad Train Number composed of cars containing the same commodity with the same origin and destination
TPProduct Type Code
TRTruck Body Serial Number
TSTransmission Serial Number
TTType Selvage
TUTested Material Identification Number
TVLine of Business
TXFederal Aviation Administration (FAA) Service Bulletin Number
The Federal Aviation Assocation (FAA) Service Bulletin number which authorizes replacement of a subject part by the replacing part number
TYTelecommunications Industry Service Code
U2UPC Shipping Container Code (1-2-5-5)
A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator; the first digit is the packaging indicator, the next two digits are the number system characters, the next five digits are the manufacturer ID number, and the remaining five digits are the item code
UAUPC/EAN Case Code (2-5-5)
UBUPC/EAN Multipack Code
UCUPC Suffix (Defines Packing Variations)
UDUPC/EAN Consumer Package Code (2-5-5)
UEUPC/EAN Module Code (2-5-5)
UFUser-Defined Shipping Container Identifier
UGDrug UPC Consumer Package Code (1-4-6-1)
UHDrug UPC Shipping Container Code (1-2-4-6-1)
UIUPC Consumer Package Code (1-5-5)
UKUPC/EAN Shipping Container Code (1-2-5-5-1)
A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and check digit; the first digit is the packaging indicator, the next two digits are the number system characters, the next five digits are the manufacturer ID number, the second five digits are the item code, and the final digit is the check digit
ULUPC Coupon Code (1-5-5-1)
UMUniversal Vendor Marking, Short Code (UVM; U Line)
UNUPC Case Code Number (1-1-5-5)
UOUCC Serial Shipping Container Code
UPUPC Consumer Package Code (1-5-5-1)
UQUnited Nations (UN) Number (Dangerous Goods)
USUniform Stock Symbol System Code Number
UTCompany-Owned Unit Train Number
Company Train Number composed of cars containing the same commodity with the same origin and destination
UVUniversal Vendor Marking, Long Code (UVM; R,P,M Lines)
VAVendor's Style Number
VBVendor's Engineering Change Level Number
VCVendor's (Seller's) Catalog Number
VEVendor Color
VIVary Item Product Number
VMVehicle Maintenance Reporting Standards
VNVendor's (Seller's) Item Number
VOVendor's Order Number
VPVendor's (Seller's) Part Number
VSVendor's Supplemental Item Number
VUVendor's Basic Unit Number
VVMotor Vehicle ID Number
VXVendor's Specification Number
W1End Item Serial Number
The serial number assigned to the entire end-item assembly
W2Work Unit Number
Number asigned for type of work or service identification associated with the product
W5Reclamation Process
Material must be reclaimed from a higher level system prior to release to Defense Reutilization and Marketing
WLWafer Lot Identifier
A serialization number identifying the manufacturer of integrated circuit wafers
WSWheel Chair Lift Serial Number
XAPreferred Part Number
XCExpendable Container Identification
XPPreferred National Stock Number
XQPreferred Manufacturer
YPPublication Number
ZBCommercial and Government Entity (CAGE) Code
A code that identifies a commercial contrator authorized to do business with the U.S. government
ZZMutually Defined

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.