935 Measurement Significance Code

Code used to benchmark, qualify or further define a measurement value

Type
Identifier (ID)
Length
Min 2 / Max 2
Codes
CodeDescription
01Where Air = 1
02Where Butyl Acetate = 1
03Approximately
04Equal to
05Greater than or equal to
06Greater than
07Less than
08Less than or equal to
09Where H2O = 1 or Water = 1
10Not equal to
11Corrected to 60 Degrees Farenheit
12Where Toluene = 1
13Vapor in Air
14Vapor in Other Than Air
15Standard Temperature and Pressure
16Conditions Other Than Standard Temperature and Pressure
17In Ethyl Alcohol
18In Ethyl Ether
19In Water
20At 1 Atmosphere Pressure
21Where Ether = 1
22Actual
23Predicted
24Air-dried Basis
A condition representative of a partially dried sample
25As-received Basis
A condition representative of a sample as it arrived at a laboratory, before any processing or conditioning
26Dry Basis
A condition representative of no moisture in the sample
27Equilibrium Basis
A condition representative of material in its natural state
28Moisture and Ash-Free Basis
A condition represenative of no moisture and no ash in the sample
29Oxidizing Atmosphere
The presence of oxidizing gases during testing
30Reducing Atmosphere
The presence of reducing gases during testing
31Calculated
32Scaled Weight
A weight that is taken from a scale rather than calculated
34Ratchet
Highest previously attained value
35Saturated Vapor
Measurement applies to the maximum amount of product material that can be held in vapor form without condensing
36Unconditional
Measurement applies with no further conditions beyond those already specified
37Short-term
Measurement applies only over the short-term specified
38Time-weighted
Measurement signifies that the measurement for each event is weighted by the time duration of that event
39Corrected
40Uncorrected
41Off Peak
42On Peak
43Intermediate
44Average
Calculated Value was based on an average parameter or standard
45Per Gallon
Calculated Value was based on per gallon parameter or standard
46Estimated

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.