WASDIS Waste disposal information

TBG3 Transport

A message to convey information on last inspection and/or on waste and cargo residues on board of a means of transport (e.g. vessel) and/or equipment related to a means of transport - and still to be disposed in the next place or port of call of the means of transport.

Header

Position
Segment
Name
Max use
  1. To head, identify and specify a message.

  2. To indicate the type and function of a message and to transmit the identifying number.

  3. To specify date, and/or time, or period.

  4. Segment group 1
    Repeat 9
    1. To specify a reference.

    2. To specify date, and/or time, or period.

  5. Segment group 2
    Repeat 1
    1. To identify a place or a location and/or related locations.

    2. To specify date, and/or time, or period.

    3. To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport.

  6. Segment group 3
    Repeat 1
    1. To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport.

      040 D5(040,030) If first, then all
    2. To specify date, and/or time, or period.

    3. To identify a place or a location and/or related locations.

    4. To specify a reference.

    5. To specify physical measurements, including dimension tolerances, weights and counts.

    6. To provide free form or coded text information.

    7. To specify a pertinent quantity.

  7. Segment group 4
    Repeat 1
    1. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    2. Segment group 5
      Repeat 1
      1. To identify a person or a department to whom communication should be directed.

      2. To identify a communication number of a department or a person to whom communication should be directed.

  8. Segment group 6
    Repeat 99
    1. To identify dangerous goods.

    2. To specify physical measurements, including dimension tolerances, weights and counts.

    3. To specify the placement of goods in relation to equipment.

    4. To provide free form or coded text information.

    5. To identify a place or a location and/or related locations.

    6. To specify date, and/or time, or period.

    7. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

  9. To end and check the completeness of a message.

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.