X12 856 Ship Notice/Manifest
This X12 Transaction Set contains the format and establishes the data contents of the Ship Notice/Manifest Transaction Set (856) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.
The transaction set enables the sender to describe the contents and configuration of a shipment in various levels of detail and provides an ordered flexibility to convey information.
The sender of this transaction is the organization responsible for detailing and communicating the contents of a shipment, or shipments, to one or more receivers of the transaction set. The receiver of this transaction set can be any organization having an interest in the contents of a shipment or information about the contents of a shipment.
- ~ Segment
- * Element
- > Component
- ^ Repetition
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code identifying the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code identifying the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Type is not applicable; the repetition separator is a delimiter and not a data element; this field provides the delimiter used to separate repeated occurrences of a simple data element or a composite data structure; this value must be different than the data element separator, component element separator, and the segment terminator
- ^
- Repetition Separator
Code specifying the version number of the interchange control segments
- 00501
- Standards Approved for Publication by ASC X12 Procedures Review Board through October 2003
A control number assigned by the interchange sender
Code indicating sender's request for an interchange acknowledgment
- 0
- No Interchange Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested (TA1)
Code indicating whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- SH
- Ship Notice/Manifest (856)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission; codes agreed to by trading partners
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code identifying the issuer of the standard; this code is used in conjunction with Data Element 480
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 005010
- Standards Approved for Publication by ASC X12 Procedures Review Board through October 2003
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) is used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 856
- Ship Notice/Manifest
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Beginning Segment for Ship Notice
To transmit identifying numbers, dates, and other basic data relating to the transaction set
A unique control number assigned by the original shipper to identify a specific shipment
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
- BSN03 is the date the shipment transaction set is created.
ASN Creation Date
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
- BSN04 is the time the shipment transaction set is created.
Code indicating the hierarchical application structure of a transaction set that utilizes the HL segment to define the structure of the transaction set
ZZZZ =Shipment, Order, Tare, Pack, Batch
Preferred format is Shipment, Order, Tare, Pack, Batch. If sending one of the other Dot supported formats below, send 0001 in BSN05.
Shipment, Order, Tare, Pack
Shipment, Order, Tare, Item
Shipment, Order, Tare, Item, Unit
- 0001
- Shipment, Order, Packaging, Item
- ZZZZ
- Mutually Defined
Shipment, Order, Tare, Pack, Batch
Detail
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- S
- Shipment
Carrier Details (Quantity and Weight)
To specify the transportation details relative to commodity, weight, and quantity
Code identifying the type of packaging; Part 1: Packaging Form, Part 2: Packaging Material; if the Data Element is used, then Part 1 is always required
- CTN
- Carton
- PLT
- Pallet
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- LB
- Pound
Carrier Details (Routing Sequence/Transit Time)
To specify the carrier and sequence of routing and provide transit time information
Code describing the relationship of a carrier to a specific shipment movement
- B
- Origin/Delivery Carrier (Any Mode)
Code designating the system/method of code structure used for Identification Code (67)
- When specifying a routing sequence to be used for the shipment movement in lieu of specifying each carrier within the movement, use TD502 to identify the party responsible for defining the routing sequence, and use TD503 to identify the actual routing sequence, specified by the party identified in TD502.
- 2
- Standard Carrier Alpha Code (SCAC)
Code identifying a party or other code
SCAC
Code specifying the method or type of transportation for the shipment
- H
- Customer Pickup
- M
- Motor (Common Carrier)
Free-form description of the routing or requested routing for shipment, or the originating carrier's identity
Code qualifying the Reference Identification
- BM
- Bill of Lading Number
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Bill of Lading Number
Code specifying type of date or time, or both date and time
- 011
- Shipped
- 067
- Current Schedule Delivery
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Party Identification
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- SF
- Ship From
- ST
- Ship To
Code designating the system/method of code structure used for Identification Code (67)
- 9
- D-U-N-S+4, D-U-N-S Number with Four Character Suffix
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
DUNS+4 number
Geographic Location
To specify the geographic place of the named party
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- O
- Order
Purchase Order Reference
To provide reference to a specific purchase order
Identifying number for Purchase Order assigned by the orderer/purchaser
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
- PRF04 is the date assigned by the purchaser to purchase order.
Carrier Details (Quantity and Weight)
To specify the transportation details relative to commodity, weight, and quantity
Code identifying the type of packaging; Part 1: Packaging Form, Part 2: Packaging Material; if the Data Element is used, then Part 1 is always required
- CTN
- Carton
- PLT
- Pallet
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- LB
- Pound
T = Tare (Pallet)
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- T
- Shipping Tare
Carrier Details (Quantity and Weight)
To specify the transportation details relative to commodity, weight, and quantity
Code identifying the type of packaging; Part 1: Packaging Form, Part 2: Packaging Material; if the Data Element is used, then Part 1 is always required
- CTN
- Carton
Number of units (pieces) of the lading commodity
Number of Cases on the Pallet
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- LB
- Pound
Marks and Numbers Information
To indicate identifying marks and numbers for shipping containers
Code specifying the application or source of Marks and Numbers (87)
- MAN01/MAN02 and MAN04/MAN05 may be used to identify two different marks and numbers assigned to the same physical container.
- When MAN01 contains code "UC" (U.P.C. Shipping Container Code) and MAN05/MAN06 contain a range of ID numbers, MAN03 is not used. The reason for this is that the U.P.C. Shipping Container code is the same on every carton that is represented in the range in MAN05/MAN06.
- GM
- EAN.UCC Serial Shipping Container Code (SSCC) and Application Identifier
Marks and numbers used to identify a shipment or parts of a shipment
- When both MAN02 and MAN03 are used, MAN02 is the starting number of a sequential range and MAN03 is the ending number of that range.
20 digit Pallet Identifier
This identifier should be bar coded on the pallet label.
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- P
- Pack
Item Identification
To specify basic item identification data
Preferred location for receiving lot numbers is at the Batch level. However, if unable to send at the batch level, suppliers can send the lot numbers at the Pack level by repeating the GTIN and providing the shipped quantity that pertains to each specific lot.
Alphanumeric characters assigned for differentiation within a transaction set
- LIN01 is the line item identification
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- LIN02 through LIN31 provide for fifteen different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- UK
- GTIN 14-digit Data Structure
Identifying number for a product or service
14 digit case GTIN
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- LT
- Lot Number
Identifying number for a product or service
Lot Number
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- CH
- Country of Origin Code
Identifying number for a product or service
Country of Origin
Item Detail (Shipment)
To specify line-item detail relative to shipment
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- SN103 defines the unit of measurement for both SN102 and SN104.
- CA
- Case
Product/Item Description
To describe a product or process in coded or free-form format
Code indicating the format of a description
- If PID01 equals "F", then PID05 is used. If PID01 equals "S", then PID04 is used. If PID01 equals "X", then both PID04 and PID05 are used.
- F
- Free-form
A free-form description to clarify the related data elements and their content
Measurements
To specify physical measurements or counts, including dimensions, tolerances, variances, and weights
(See Figures Appendix for example of use of C001)
The MEA segment is required for variable weight items.
Code identifying the broad category to which a measurement applies
- WT
- Weights
Code identifying a specific product or process characteristic to which a measurement applies
- N
- Actual Net Weight
Date/Time Reference
To specify pertinent dates and times
Preferred location for receiving code dates is at the Batch level. However, if unable to send at the batch level, suppliers can send the code dates at the Pack level by repeating the GTIN and providing the shipped quantity
that pertains to each specific lot.
This loop is only used with BSN05 value of 'ZZZZ'
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- ZZ
- Mutually Defined
Item Identification
To specify basic item identification data
The batch level is the preferred location for receiving lot numbers.
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- LIN02 through LIN31 provide for fifteen different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- LT
- Lot Number
Identifying number for a product or service
Batch/Lot Number
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- CH
- Country of Origin Code
Identifying number for a product or service
Country of Origin for this batch of product
Item Detail (Shipment)
To specify line-item detail relative to shipment
The sum of the individual Batch HL SN1 quantities should total to the Pack HL SN1
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- SN103 defines the unit of measurement for both SN102 and SN104.
- CA
- Case
Measurements
To specify physical measurements or counts, including dimensions, tolerances, variances, and weights
(See Figures Appendix for example of use of C001)
The MEA segment is required for variable weight items
Code identifying the broad category to which a measurement applies
- WT
- Weights
Code identifying a specific product or process characteristic to which a measurement applies
- N
- Actual Net Weight
Date/Time Reference
To specify pertinent dates and times
The batch level is the preferred location for receiving code dates.
Summary
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- Number of line items (CTT01) is the accumulation of the number of HL segments.
If used, hash total (CTT02) is the sum of the value of units shipped (SN102) for each SN1 segment.
Total number of line items in the transaction set
Number of line items (CTT01) is the accumulation of the number of HL
segments
Sum of values of the specified data element. All values in the data element will be summed without regard to decimal points (explicit or implicit) or signs. Truncation will occur on the left most digits if the sum is greater than the maximum size of the hash total of the data element.
-.0018 First occurrence of value being hashed.
.18 Second occurrence of value being hashed.
1.8 Third occurrence of value being hashed.
18.01 Fourth occurrence of value being hashed.
18E2 Fifth occurrence of value being hashed.
1873 Hash Total
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Assigned number originated and maintained by the sender
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Sample from DOT Foods
BSN*00*0084183634*20110311*1345*ZZZZ~
HL*1**S~
TD1*PLT*22****G*38136.05*LB~
TD5*B*2*ABCD*M*ABCD TRUCKING~
REF*BM*81355~
DTM*011*20110304*082746~
DTM*067*20110307~
N1*ST*DOT FOODS*9*0256712560103~
N3*ROUTE 99 S~
N4*MOUNT STERLING*IL*62353~
N1*SF*ABC COMPANY*9*1234567890123~
N3*123 ANYWHERE ST~
N4*ANYWHERE*IL*61234~
HL*2*1*O~
PRF*190453-001***20110302~
HL*3*2*T~
MAN*GM*12345678901234567890~
HL*4*3*P~
LIN**UK*10037500810010~
SN1**63*CA~
PID*F****CR OF BROC CHEE4/8LB~
MEA*WT*N*2110.5*LB~
HL*5*4*ZZ~
LIN**LT*MF0381~
SN1**63*CA~
MEA*WT*N*2110.5*LB~
DTM*405*20110207~
DTM*036*20120207~
HL*6*2*T~
MAN*GM*00100083461100106991~
HL*7*6*P~
LIN**UK*10037500811017~
SN1**63*CA~
PID*F****FRNCH ONION SOUP 4/8LB~
MEA*WT*N*2110.5*LB~
HL*8*7*ZZ~
LIN**LT*MF0131~
SN1**63*CA~
MEA*WT*N*2110.5*LB~
DTM*405*20110113~
DTM*036*20120113~
HL*9*2*T~
MAN*GM*00100083461100107011~
HL*10*9*P~
LIN**UK*10037500815015~
SN1**63*CA~
PID*F****CHICKEN NOODLE-PKG 4/8LB~
MEA*WT*N*2110.5*LB~
HL*11*10*ZZ~
LIN**LT*MF0101~
SN1**63*CA~
MEA*WT*N*2110.5*LB~
DTM*405*20110110~
DTM*036*20120110~
CTT*3*189*38.136*LB~
SE*55*0001~
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.