X12 856 Ship Notice/Manifest
This Draft Standard for Trial Use contains the format and establishes the data contents of the Ship Notice/Manifest Transaction Set (856) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment. The transaction set enables the sender to describe the contents and configuration of a shipment in various levels of detail and provides an ordered flexibility to convey information.
The sender of this transaction is the organization responsible for detailing and communicating the contents of a shipment, or shipments, to one or more receivers of the transaction set. The receiver of this transaction set can be any organization having an interest in the contents of a shipment or information about the contents of a shipment.
- ~ Segment
- * Element
- > Component
- None included
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- SH
- Ship Notice/Manifest (856)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 856
- Ship Notice/Manifest
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Beginning Segment for Ship Notice
To transmit identifying numbers, dates, and other basic data relating to the transaction set
Code identifying purpose of transaction set
- 00
- Original
A unique control number assigned by the original shipper to identify a specific shipment
Date expressed as CCYYMMDD
- BSN03 is the date the shipment transaction set is created.
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
- BSN04 is the time the shipment transaction set is created.
Code indicating the hierarchical application structure of a transaction set that utilizes the HL segment to define the structure of the transaction set
- 0001
- Shipment, Order, Packaging, Item
- 0002
- Shipment, Order, Item, Packaging
Detail
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- S
- Shipment
Carrier Details (Quantity and Weight)
To specify the transportation details relative to commodity, weight, and quantity
The TD1 segment is used simply to report the weight of the shipment being reported.
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
You may hardcode '01' here.
- 01
- Actual Pounds
Carrier Details (Routing Sequence/Transit Time)
To specify the carrier and sequence of routing and provide transit time information
The TD505 must contain the ship code for the actual carrier and service level used. Please make sure your Vendor Implementation representative has supplied these codes to you as the table is unique to this relationship. It is also worth noting that you need to support UPS, FedEx, & USPS and that there are separate shipping codes for Direct-to-Customer orders than Ship-to-Store.
Please have all 3 accounts setup and submit samples of your shipping labels as per the "Walmart.com Shipping Label Instructions.pdf" from the Setup Guides.
Code describing the relationship of a carrier to a specific shipment movement
- B
- Origin/Delivery Carrier (Any Mode)
Always required
Free-form description of the routing or requested routing for shipment, or the originating carrier's identity
Contact your CommerceHub Onboarding Specialist for the complete list of shipping codes
Date/Time Reference
To specify pertinent dates and times
To achieve excellent customer service Walmart has very strict windows in which you must ship your orders. If the order is received in the AM by noon it must ship that day. If the order comes in after noon it must ship the next day. These windows are based on your local time and are dependent on your operational hours.
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- O
- Order
Purchase Order Reference
To provide reference to a specific purchase order
This is your Purchase Order Number.
Identifying number for Purchase Order assigned by the orderer/purchaser
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- I
- Item
Item Identification
To specify basic item identification data
Alphanumeric characters assigned for differentiation within a transaction set
- LIN01 is the line item identification
This is the PO Line Number. Please note that due to the unique buiness
of Drop-Shipping these line numbers may not be sequential. Please use
the data found in the PO101 of the 850 to populate this element.
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- LIN02 through LIN31 provide for fifteen different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- VN
- Vendor's (Seller's) Item Number
Identifying number for a product or service
Vendor's Item Number.
Item Detail (Shipment)
To specify line-item detail relative to shipment
A 'ship' action is assumed if the SN1-08 code is omitted or not 'AC','ID'
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
If SN1_08 = "AC" then SN1_02 should be populated
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- SN103 defines the unit of measurement for both SN102 and SN104.
- EA
- Each
Quantity ordered
If SN1_08 not = "AC" then SN1_05 should be populated
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- EA
- Each
Code specifying the action taken by the seller on a line item requested by the buyer
Any code other than "AC" or those listed indicates shipment of the quantity specified in SN1_05, regardless of value in SN1-02
- AC
- Item Accepted and Shipped
- ID
- Item Deleted
Reason provided in "TD" qualified REF-02 segment
Reference Identification
To specify identifying information
Code qualifying the Reference Identification
- TD
- Reason for Change
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Contact your CommerceHub Onboarding Specialist for the complete list of cancel codes
A free-form description to clarify the related data elements and their content
Additional freeform description of cancellation.
Name
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- WH
- Warehouse
Code designating the system/method of code structure used for Identification Code (67)
- 54
- Warehouse
Use when reporting warehouse id in N104
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Warehouse ID
Pack level HL is required for reporting tracking number(s) when item level SN1_08 = "AC"
Pack level HL is required only when reporting tracking number(s) when item level SN1_08 = "AC"
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- P
- Pack
Marks and Numbers
To indicate identifying marks and numbers for shipping containers
This is where you will populate the tracking number. Please note that CommerceHub has Tracking Number validation in place for both UPS & FedEx.
Please Note: You are required to send the SSCC ID if this is a ship-to-store order and you are creating your own packing slip,
Code specifying the application or source of Marks and Numbers (87)
- MAN01/MAN02 and MAN04/MAN05 may be used to identify two different marks and numbers assigned to the same physical container.
- When MAN01 contains code "UC" (U.P.C. Shipping Container Code) and MAN05/MAN06 contain a range of ID numbers, MAN03 is not used. The reason for this is that the U.P.C. Shipping Container code is the same on every carton that is represented in the range in MAN05/MAN06.
- CP
- Carrier-Assigned Package ID Number
Marks and numbers used to identify a shipment or parts of a shipment
- When both MAN02 and MAN03 are used, MAN02 is the starting number of a sequential range and MAN03 is the ending number of that range.
Tracking number
IMPORTANT NOTE: CommerceHub enforces validation rules for UPS and FEDEX tracking numbers including check digit routines when applicable. Please insure that all tracking numbers you submit are correctly formatted. Any shipment confirmation message containing invalid tracking numbers will be rejected.
Code specifying the application or source of Marks and Numbers (87)
- GM
- SSCC-18 and Application Identifier
Marks and numbers used to identify a shipment or parts of a shipment
- When both MAN05 and MAN06 are used, MAN05 is the starting number of a sequential range, and MAN06 is the ending number of that range.
This is where the SSCC ID from the ASN label must be sent for a Ship to Store order. If you are using the CommerceHub generated ASN labels that are supplied with your packslips you can probably ignore this value & its qualifier. If you are generating your own labels and packslips you need to create the SSCC ID and return it to us here.
Summary
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- Number of line items (CTT01) is the accumulation of the number of HL segments.
If used, hash total (CTT02) is the sum of the value of units shipped (SN102) for each SN1 segment.
Total number of line items in the transaction set
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Assigned number originated and maintained by the sender
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.