COARRI Container discharge/loading report
TBG3 Transport
A message by which the container terminal reports that the containers specified have been discharged from a seagoing vessel (discharged as ordered, overlanded or shortlanded), or have been loaded into a seagoing vessel.
This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.
Header
- 00010Message headerMandatoryMax 1A service segment starting and uniquely identifying a message. The message type code for the Container discharge/loading report message is COARRI. Note: Container discharge/loading report messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 COARRI 0052 D 0054 13B 0051 UN 1. Data element S009/0057 is retained for upward compatibility. The use ofS016 and/or S017 is encouraged in preference.2. The combination of the values carried in data elements 0062 and S009 shallbe used to identify uniquely the message within its group (if used) or ifnot used, within its interchange, for the purpose of acknowledgement.
- 00020Beginning of messageMandatoryMax 1A segment to indicate the beginning of a message and to transmit identifying number and the further specification of the message type (in data element 1001: Document name code), such as Loading report, Discharge report. 
- 00030Date/time/periodConditionalMax 9A segment to indicate a date and/or time applying to the whole message, such as date and time of document or message issue. 
- 00040Free textConditionalMax 9A segment to specify free form or processable supplementary information, such as: - change information 
- Segment group 1Repeat 9- 00060ReferenceMandatoryMax 1A segment to express a reference which applies to the entire message, such as: - container discharge/loading order reference - reference to previous message 
- 00070Date/time/periodConditionalMax 9A segment to indicate date and/or time related to the reference. 
 
- 00060ReferenceMandatoryMax 1
- Segment group 2Repeat 1- 00090Transport informationMandatoryMax 1A segment identifying the voyage of the vessel relevant to the message (main transport). 040 D5(040,030) If first, then all
- 00100Date/time/periodConditionalMax 9A segment to identify the date(s) and time(s) related to the main carriage means of transport. 
- 00110ReferenceConditionalMax 9A segment identifying a relevant reference number, such as: - shipping - syndicate - marketing organization - conference code 
- Segment group 3Repeat 9- 00130Place/location identificationMandatoryMax 1A segment to specify a location related to the means of transport such as places and ports of arrival and departure. 
- 00140Date/time/periodConditionalMax 9A segment to specify the date(s) and time(s) related to a location. 
 
- 00130Place/location identificationMandatoryMax 1
 
- 00090Transport informationMandatoryMax 1
- Segment group 4Repeat 9- 00160Name and addressMandatoryMax 1A segment to identify the party's name, address, and function, and other addresses, such as: - message recipient - message sender - ordering customer - ordering customer agent 
- Segment group 5Repeat 9- 00180Contact informationMandatoryMax 1A segment to identify a person or department of a message sender and/or message recipient, such as: - information contact 
- 00190Communication contactConditionalMax 9A segment to identify a communication number of a person or department to whom communication should be directed. 
 
- 00180Contact informationMandatoryMax 1
 
- 00160Name and addressMandatoryMax 1
- Segment group 6Repeat 9999- 00210Equipment detailsMandatoryMax 1A segment identifying a container, container size/type. The equipment status may be e.g. overlanded, shortlanded, import, export. 
- 00220ReferenceConditionalMax 9A segment identifying a relevant reference number, such as: - container sequence number - booking reference number 
- 00230Nature of cargoConditionalMax 9A segment to show the broad classification of the goods within a container for operational and general information purposes. 
- 00240Transport movement detailsConditionalMax 9A segment to indicate a Full Container Load (FCL) or a Less than Full Container Load (LCL). 
- 00250Date/time/periodConditionalMax 9A segment to identify a date and time related to the equipment, such as: - Date and/or time of actual loading or discharge - CSC expiration date (International Convention for Safe Containers) 
- Segment group 7Repeat 9- 00270Place/location identificationMandatoryMax 1A segment to identify a location or country related to the equipment, such as: - stowage cell - (final) place/port of discharge - transhipment place - place of delivery - country of origin/destination 
- 00280Date/time/periodConditionalMax 9A segment to specify date(s) and time(s) related to a location. 
 
- 00270Place/location identificationMandatoryMax 1
- 00290MeasurementsConditionalMax 9A segment specifying a physical measurement related to the equipment, such as: - gross weight 
- 00300DimensionsConditionalMax 9A segment specifying physical dimensions related to the equipment, such as: - gross dimensions - off standard dimension general - off standard dimension left - off standard dimension right - off standard dimension back - off standard dimension front 
- Segment group 8Repeat 9- 00320TemperatureMandatoryMax 1A segment which identifies the transport temperature setting of the container. 
- 00330Range detailsConditionalMax 1A segment to specify the transport temperature range setting of the container. 
 
- 00320TemperatureMandatoryMax 1
- 00340Seal numberConditionalMax 9A segment identifying a seal number related to the equipment. 
- 00350Free textConditionalMax 9A segment to specify supplementary information related to the equipment, such as: - blockade reason - government inspection service - container loading remarks - container remarks - container order information - additional remarks concerning the container - container safety convention plate - continuous examination program (ACEP) 
- 00360Percentage detailsConditionalMax 9A segment to specify percentages related to the equipment such as percentage humidity. 
- Segment group 9Repeat 99- 00380Dangerous goodsMandatoryMax 1A segment to identify the UN-number and the class of the dangerous goods loaded in the container. 
- 00390Free textConditionalMax 9A segment to give additional information regarding dangerous goods. 
- 00400MeasurementsConditionalMax 9A segment to specify measurements of the dangerous goods, such as: - net net weight. 
- Segment group 10Repeat 9- 00420Contact informationMandatoryMax 1A segment to identify a person or department to be contacted regarding dangerous goods. 
- 00430Communication contactConditionalMax 9A segment to specify communication details of the dangerous goods contact. 
 
- 00420Contact informationMandatoryMax 1
 
- 00380Dangerous goodsMandatoryMax 1
- 00440Attached equipmentConditionalMax 9A segment to identify clip-on units, such as: - generator sets 
- 00450Additional product idConditionalMax 9A segment to specify a commodity code relating to goods in the container. 
- 00460Component detailsConditionalMax 1A segment to specify the details of the components of transport equipment. 
- 00470Handling instructionsConditionalMax 9A segment to specify handling instructions related to the equipment. 
- Segment group 11Repeat 9- 00490DamageMandatoryMax 1A segment to specify equipment damages, such as the point of the damage on the equipment, and the type of damage. 
- 00500Component detailsConditionalMax 1A segment to specify component details of the damaged equipment. 
 
- 00490DamageMandatoryMax 1
- Segment group 12Repeat 1- 00520Transport informationMandatoryMax 1A segment to identify the on-carriage transport details of the mode, means of transport by which the container will depart after being discharged. 040 D5(040,030) If first, then all
- 00530Date/time/periodConditionalMax 9A segment to specify a date/time relating to the on-carriage transport, such as arrival or departure date/time. 
- Segment group 13Repeat 9- 00550Place/location identificationMandatoryMax 1A segment identifying a location related to the transport details, such as: - place of departure 
- 00560Date/time/periodConditionalMax 9A segment to specify a date/time relating to the on- carriage transport, such as arrival. 
 
- 00550Place/location identificationMandatoryMax 1
 
- 00520Transport informationMandatoryMax 1
- 00570Name and addressConditionalMax 9A segment to specify a related address or party, such as: - container operator 
 
- 00210Equipment detailsMandatoryMax 1
- 00580Control totalConditionalMax 1A segment to specify the number of containers in the message, explicitly given by the sender. 
- 00590Message trailerMandatoryMax 1A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 1. 0062, the value shall be identical to the value in 0062 in thecorresponding UNH segment.