COPINO Container pre

Joint Transport Group (JM4)

A message by which an inland carrier notifies of the delivery or pick-up of containers.

This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.

Send feedback Share via email

Header

Position
Segment
Name
Max use

  1. To head, identify and specify a message.

  2. To indicate the type and function of a message and to transmit the identifying number.

  3. To specify date, and/or time, or period.

  4. To provide free form or coded text information.

  5. Segment group 1
    Repeat 9

    1. To specify a reference.

    2. To specify date, and/or time, or period.

  6. Segment group 2
    Repeat 1

    1. To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

    2. To specify date, and/or time, or period.

    3. Segment group 3
      Repeat 9

      1. To identify a place or a location and/or related locations.

      2. To specify date, and/or time, or period.

  7. Segment group 4
    Repeat 9

    1. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    2. Segment group 5
      Repeat 9

      1. To identify a person or a department to whom communication should be directed.

      2. To identify a communication number of a department or a person to whom communication should be directed.

  8. Segment group 6
    Repeat 999

    1. To indicate totals of a goods item.

    2. To specify handling and where necessary, notify hazards.

    3. To specify the temperature setting.

    4. To identify a range.

    5. To specify the placement of goods in relation to equipment.

    6. Segment group 7
      Repeat 99

      1. To identify dangerous goods.

      2. To provide free form or coded text information.

      3. Segment group 8
        Repeat 9

        1. To identify a person or a department to whom communication should be directed.

        2. To identify a communication number of a department or a person to whom communication should be directed.

  9. Segment group 9
    Repeat 999

    1. To identify a unit of equipment.

    2. To specify a reference.

    3. To specify the number of units.

    4. To specify physical measurements, including dimension tolerances, weights and counts.

    5. To specify dimensions.

    6. To provide free form or coded text information.

    7. To specify percentage information.

    8. To specify the seal number or a range of seal numbers.

    9. To specify attached or related equipment.

    10. To specify handling and where necessary, notify hazards.

    11. Segment group 10
      Repeat 9

      1. To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

      2. To specify date, and/or time, or period.

      3. Segment group 11
        Repeat 9

        1. To identify a place or a location and/or related locations.

        2. To specify date, and/or time, or period.

    12. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    13. Segment group 12
      Repeat 99

      1. To identify dangerous goods.

      2. To provide free form or coded text information.

      3. Segment group 13
        Repeat 9

        1. To identify a person or a department to whom communication should be directed.

        2. To identify a communication number of a department or a person to whom communication should be directed.

  10. To provide control total.

  11. To end and check the completeness of a message.

Stedi.comDocumentationContact usPrivacy settings

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.