ID3 Dimensions Detail
To provide information about the physical dimensions of the case.
Position
Element
Name
Type
Requirement
Min
Max
Repeat
Code (Universal Product Code - ``UPC'') including two high order digits identifying the ``system'' (U.S. Grocery = 00, 06 or 07; U.S.
Drug = 03). Using the U.S. Grocery system, the next ten digits are: Manufacturer (5) Case Code (5).
Either ID301 or ID302 must be present.
Code identifying the type/source of the descriptive number used in Product/Service ID (234).
If either ID302 or ID303 is present, then the other is required.
Identifying number for a product or service.
Number of inner pack units per outer pack unit.
The number of consumer selling units that are included in the vendor inner pack.
Vertical dimension of an object measured when the object is in the upright position.
If either ID306, ID307, ID308 or ID309 is present, then the others are required.
Shorter measurement of the two horizontal dimensions measured with the object in the upright position.
The depth is the thickness of the product. In the dimension coordinate axes represented by X, Y and Z, depth is measured along the Z axis where X is the horizontal axis and Y is the vertical axis.
Code identifying the basic unit of measurement.
Numeric value of weight.
If either ID310 or ID311 is present, then the other is required.
Code identifying the basic unit of measurement.
Value of volumetric measure.
If either ID312 or ID313 is present, then the other is required.
Code identifying the basic unit of measurement.
The number of units in the tray.
If ID314 is present, then ID315, ID316 and ID317 are required.
Vertical dimension of an object measured when the object is in the upright position.
ID315 is the tray height.
If either ID315, ID316, ID317 or ID318 are present, then the others are required.
Shorter measurement of the two horizontal dimensions measured with the object in the upright position.
ID316 is the tray width.
The depth is the thickness of the product. In the dimension coordinate axes represented by X, Y and Z, depth is measured along the Z axis where X is the horizontal axis and Y is the vertical axis.
ID317 is the tray depth.
Code identifying the basic unit of measurement.
Code indicating orientation of exposure.
ID319 is the tray nesting code.
The amount of distance that one product fits into (or nests within) another product.
ID320 is the tray nesting.
If either ID320 or ID321 are present, then the other is required.
Code identifying the basic unit of measurement.