X12 212 Motor Carrier Delivery Trailer Manifest
This Draft Standard for Trial Use contains the format and establishes the data contents of the Motor Carrier Delivery Trailer Manifest Transaction Set (212) for use within the context of an Electronic Data Interchange (EDI) environment.
This transaction set can be used to allow motor carriers to provide consignees or other interested parties with the contents of a trailer, containing multiple shipments, that has been tendered for delivery. It is not to be used to provide the recipient with data relative to a full truckload shipment.
- ~ Segment
- * Element
- > Component
- None included
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- TM
- Motor Carrier Delivery Trailer Manifest (212)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 212
- Motor Carrier Delivery Trailer Manifest
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Beginning Segment for Motor Carrier Delivery Trailer Manifest
To transmit identifying numbers and other basic data relating to the Motor Carrier Delivery Trailer Manifest Transaction Set
Standard Carrier Alpha Code
- ATA01 is the Standard Carrier Alpha Code (SCAC) of the carrier that is delivering the trailer.
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
- ATA02 is the delivery trailer manifest number assigned by the carrier.
Date expressed as CCYYMMDD
- ATA03 is the date that the delivery trailer manifest was created.
Set Purpose
To allow for positive identification of transaction set purpose
Code identifying purpose of transaction set
Name
To identify a party by type of organization, name, and code
- Loop 0100 provides the location where the carrier will deliver the trailer.
Code identifying an organizational entity, a physical location, property or an individual
- ST
- Ship To
Code designating the system/method of code structure used for Identification Code (67)
- 9
- D-U-N-S+4, D-U-N-S Number with Four Character Suffix
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Duns + 4 (List can be found on Supplier site for the 4 digit location number. This will be listed on the PO).
Address Information
To specify the location of the named party
Geographic Location
To specify the geographic place of the named party
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Estimated Delivery Date
To specify pertinent dates and times
Scheduled Delivery Date
To specify pertinent dates and times
Shipment Status Details
To specify the status of a shipment, the reason for that status, the date and time of the status and the date and time of any appointments scheduled.
- The AT7 segment provides the status of all of the shipments on the trailer.
Code indicating the status of a shipment
- If AT701 is present, AT705 is the date the status occurred. If AT703 is present, AT705 is a date related to an appointment.
- If AT701 is present, AT706 is the time of the status. If AT703 is present, AT706 is the time of the appointment.
Code indicating the reason a shipment status or appointment reason was transmitted
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Code identifying the time. In accordance with International Standards Organization standard 8601, time can be specified by a + or - and an indication in hours in relation to Universal Time Coordinate (UTC) time; since + is a restricted character, + and - are substituted by P and M in the codes that follow
- If AT707 is not present then AT706 represents local time of the status.
Equipment or Container Owner and Type
To specify the owner, the identification number assigned by that owner, and the type of equipment
Sequencing or serial part of an equipment unit's identifying number (pure numeric form for equipment number is preferred)
Code identifying type of equipment used for shipment
- MS203 identifies the type for the equipment specified in MS202.
- TL
- Trailer (not otherwise specified)
- TW
- Trailer, Refrigerated
Detail
Assigned Number
To reference a line number in a transaction set
- Loop 0200 provides the specific details concerning all of the shipments included in the manifest. There will be one iteration of loop 0200 for each shipment contained in the manifest. The most common way to identify the shipments is by the PRO number assigned by the carrier.
Number assigned for differentiation within a transaction set
Business Instructions and Reference Number
To specify instructions in this business relationship or a reference number
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Code qualifying the Reference Identification
- BM
- Bill of Lading Number
- CN
- Carrier's Reference Number (PRO/Invoice)
- CR
- Customer Reference Number
- LO
- Load Planning Number
A free-form description to clarify the related data elements and their content
Shipment Weight, Packaging and Quantity Data
To specify shipment details in terms of weight, and quantity of handling units
Number of units (pieces) of the lading commodity
- AT804 is the quantity of handling units that are not unitized (for example a carton). When added to the quantity in AT805, it is the total quantity of handling units in the shipment.
Shipment Purchase Order Detail
To specify the purchase order details for a shipment
Identifying number for Purchase Order assigned by the orderer/purchaser
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
- SPO02 is the department number.
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- CA
- Case
- CT
- Carton
Numeric value of quantity
- SPO04 is the total quantity for the purchase order.
Numeric value of weight
- SPO06 is the total weight for the purchase order.
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
- SPO08 is used to specify sorting and/or segregating reference numbers for each receiving location (processing area).
Name
To identify a party by type of organization, name, and code
- Loop 0220 shall only be used to provide the identification of the shipper if the carrier has not provided that information in a previous shipment status message.
Code identifying an organizational entity, a physical location, property or an individual
- SF
- Ship From
Code designating the system/method of code structure used for Identification Code (67)
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Address Information
To specify the location of the named party
Geographic Location
To specify the geographic place of the named party
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Assigned number originated and maintained by the sender
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.