ATR Animal Test Result

To report individual animal test results

Position
Element
Name
Type
Requirement
Min
Max
Repeat
ATR-01
Test Type Code
Identifier (ID)
Mandatory
2
2
-
Code identifying the type of test performed for which measured results will be reported
ATR-02
Test Period or Interval Value
Numeric (N0)
Mandatory
1
6
-
Numeric value of period or interval signifying when a test event occurs
ATR02 identifies the dose day or interval on test this result was recorded.
ATR-03
Unit of Time Period or Interval
Identifier (ID)
Mandatory
2
2
-
Code indicating the time period or interval
ATR-04
Measurement Value
Decimal number (R)
Conditional
1
20
-
The value of the measurement
R0406: At least one of ATR-04 or ATR-06 is required
P0405: If either ATR-04 or ATR-05 is present, then the other is required
ATR04 used to report numeric test results.
ATR-05
Composite Unit of Measure
Composite (composite)
Conditional
01
Unit or Basis for Measurement Code
Identifier (ID)
Mandatory
2
2
-
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
02
Exponent
Decimal number (R)
Optional
1
15
-
Power to which a unit is raised
If C001-02 is not used, its value is to be interpreted as 1.
03
Multiplier
Decimal number (R)
Optional
1
10
-
Value to be used as a multiplier to obtain a new value
If C001-03 is not used, its value is to be interpreted as 1.
04
Unit or Basis for Measurement Code
Identifier (ID)
Optional
2
2
-
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
05
Exponent
Decimal number (R)
Optional
1
15
-
Power to which a unit is raised
If C001-05 is not used, its value is to be interpreted as 1.
06
Multiplier
Decimal number (R)
Optional
1
10
-
Value to be used as a multiplier to obtain a new value
If C001-06 is not used, its value is to be interpreted as 1.
07
Unit or Basis for Measurement Code
Identifier (ID)
Optional
2
2
-
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
08
Exponent
Decimal number (R)
Optional
1
15
-
Power to which a unit is raised
If C001-08 is not used, its value is to be interpreted as 1.
09
Multiplier
Decimal number (R)
Optional
1
10
-
Value to be used as a multiplier to obtain a new value
If C001-09 is not used, its value is to be interpreted as 1.
10
Unit or Basis for Measurement Code
Identifier (ID)
Optional
2
2
-
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
11
Exponent
Decimal number (R)
Optional
1
15
-
Power to which a unit is raised
If C001-11 is not used, its value is to be interpreted as 1.
12
Multiplier
Decimal number (R)
Optional
1
10
-
Value to be used as a multiplier to obtain a new value
If C001-12 is not used, its value is to be interpreted as 1.
13
Unit or Basis for Measurement Code
Identifier (ID)
Optional
2
2
-
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
14
Exponent
Decimal number (R)
Optional
1
15
-
Power to which a unit is raised
If C001-14 is not used, its value is to be interpreted as 1.
15
Multiplier
Decimal number (R)
Optional
1
10
-
Value to be used as a multiplier to obtain a new value
If C001-15 is not used, its value is to be interpreted as 1.
ATR-06
Non-Numeric Test Value
String (AN)
Conditional
1
30
-
Identifies a non-numeric value for a test result
ATR06 reports non-numeric test results.
ATR-07
Description
String (AN)
Optional
1
80
-
A free-form description to clarify the related data elements and their content
ATR07 clarifies ATR01 by identifying the name of a specific test performed for which the results are being reported.
ATR-08
Yes/No Condition or Response Code
Identifier (ID)
Optional
1
1
-
Code indicating a Yes or No condition or response
ATR08 indicates whether this data was used in analysis. A "Y" indicates data was used in analysis; an "N" indicates it was not used.
ATR-09
Surface/Layer/Position Code
Identifier (ID)
Optional
2
2
-
Code indicating the product surface, layer or position that is being described
ATR09 designates relative position or symetry of the organ or observation being reported.
ATR-10
Time
Time (TM)
Optional
4
8
-
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
ATR10 identifies the time of day this result was measured.
ATR10 need be present only when more than one result is recorded for the same test type on the same day.

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.