X12 875 Grocery Products Purchase Order
This Draft Standard for Trial Use contains the format establishes the data contents of the Grocery Products Purchase Order Transaction Set (875) for use within the context of an Electronic Data Interchange (EDI) environment. This transaction set can be used to provide for customary and established grocery industry practice relative to the placement of purchase orders for finished goods in a retail or wholesale consumer market. This standard can be used by a retailer or wholesaler organization to request delivery of finished goods from a broker or supplier organization. This transaction set should not be used to convey purchase order changes or purchase order acknowledgement information.
- ~ Segment
- * Element
- > Component
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- OG
- Order Group - Grocery (875, 876)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
- 004010UCS
- Uniform Communication Standard; The EDI standard maintained and utilized by the grocery industry.
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 875
- Grocery Products Purchase Order
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Purchase Order Identification
To transmit identifying dates and numbers for this transaction set
Code identifying purpose of transaction set
- N
- Original
Date expressed as CCYYMMDD
- G5002 is the date assigned by the purchaser to the purchase order.
Identifying number for Purchase Order assigned by the orderer/purchaser
Note/Special Instruction
To transmit information in a free-form format, if necessary, for comment or special instruction
Code identifying the functional area or purpose for which the note applies
- DEL
- New Ship-To Address
- GEN
- Delivery Instructions
A free-form description to clarify the related data elements and their content
Transportation Instructions
To specify transportation instructions relating to the shipment
Code identifying payment terms for transportation charges
- CC
- Collect
- PP
- Prepaid (by Seller)
Code specifying the method or type of transportation for the shipment
- H
- Customer Pickup
- M
- Motor (Common Carrier)
Name
To identify a party by type of organization, name, and code
- One occurrence of the N1 loop must be used to identify the party to whom the merchandise is to be shipped.
Code identifying an organizational entity, a physical location, property or an individual
- BT
- Bill-to-Party
- ST
- Ship To
- VN
- Vendor
Code designating the system/method of code structure used for Identification Code (67)
- 9
- D-U-N-S+4, D-U-N-S Number with Four Character Suffix
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Address Information
To specify the location of the named party
Geographic Location
To specify the geographic place of the named party
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Detail
Line Item Detail - Product
To specify basic and most frequently used purchase order line item data
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- G6802 qualifies G6801.
- CA
- Case
Gross unit cost within the appropriate price bracket for a line item
Code (Universal Product Code - U.P.C.) including two high order digits identifying the "system" (U.S. Grocery = 00, 06 or 07; U.S. Drug = 03); using the U.S. Grocery system, the next ten digits are: Manufacturer (5) Case Code (5)
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- PI
- Purchaser's Item Code
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- UK
- UCC-14 Case Code
Identifying number for a product or service
GTIN compliant UCC-14 Case Code. 13 digit number plus check digit.
Line Item Detail - Description
To describe an item in free-form format
Allowance or Charge
To specify allowances, charges, or services
Code identifying the type of allowance or charge
- 62
- Spoils Allowance
- 80
- Off Invoice or Billback
Code indicating method of handling for an allowance or charge
If G7201 = 80 and G7202 = 01, this is a Billback.
If G7201 = 80 and G7202 = 02, this is an Off-Invoice Allowance.
If G7201 = 54 and G7202 = 02, this is a pickup Allowance.
If G7201 = 51 and G7202 = 02, this is a quantity discount.
Allowance or Charge Rate per Unit
Summary
Total Purchase Order
To specify summary details of total items shipped in terms of quantity, weight, and volume, and to specify payment method
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- G7602 qualifies G7601.
- CA
- Case
Monetary amount
- G7608 indicates the total monetary amount of the purchase order as determined by the buyer.
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Assigned number originated and maintained by the sender
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Sample 1
G50*N*20100203*STATERTST~
G62*10*20100210~
G66*CC*H~
N1*ST*STATER BROS.*9*1077284200008~
N3*311 S. TIPPECANOE~
N4*SAN BERNARDINO*CA*92408~
N1*BT*STATER BROS.*9*1077284200000~
G68*375*CA*16.56*004180036500*PI*014501620*UK*00041800365005~
G69*WELCHS JCE GRAPE~
G72*80*02***2.63~
G72*80*01***2.4~
G72*62*02***.0828~
G68*225*CA*16.56*004180032800*PI*014501624*UK*00041800328000~
G69*WELCHS JCE PASSION FRUIT~
G72*80*02***2.63~
G72*80*01***2.4~
G72*62*02***.0828~
G68*150*CA*16.56*004180040050*PI*014501628*UK*00041800400508~
G69*WELCHS JCE TROP CHRY COCKTAIL~
G72*80*02***2.63~
G72*80*01***2.4~
G72*62*02***.0828~
G68*225*CA*16.56*004180036900*PI*014501630*UK*00041800369003~
G69*WELCHS JCE WHT GRP PEACH CKTL~
G72*80*02***2.63~
G72*80*01***2.4~
G72*62*02***.0828~
G68*75*CA*16.56*004180036200*PI*014501632*UK*00041800362004~
G69*WELCHS JCE STRWBRY BREEZE CKTL~
G72*80*02***2.63~
G72*80*01***2.4~
G72*62*02***.0828~
G68*75*CA*16.56*004180040107*PI*014501634*UK*00041800401079~
G69*WELCHS JCE MANDARIN MANGO CKTL~
G72*80*02***2.63~
G72*80*01***2.4~
G72*62*02***.0828~
G76*1125*CA~
SE*40*000288001~
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.