CODECO Container gate

Joint Transport Group (JM4)

A message by which a terminal, depot, etc. confirms that the containers specified have been delivered or picked up by the inland carrier (road, rail or barge). This message can also be used to report internal terminal container movements (excluding loading and discharging the vessel) and to report the change in status of container(s) without those containers having physically been moved.

This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.

Send feedback Share via email

Header

Position
Segment
Name
Max use

  1. To head, identify and specify a message.

  2. To indicate the type and function of a message and to transmit the identifying number.

  3. To specify date, and/or time, or period.

  4. To provide free form or coded text information.

  5. Segment group 1
    Repeat 9

    1. To specify a reference.

    2. To specify date, and/or time, or period.

  6. Segment group 2
    Repeat 1

    1. To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

    2. To specify a reference.

    3. To identify a place or a location and/or related locations.

    4. To specify date, and/or time, or period.

  7. Segment group 3
    Repeat 9

    1. To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207.

    2. Segment group 4
      Repeat 9

      1. To identify a person or a department to whom communication should be directed.

      2. To identify a communication number of a department or a person to whom communication should be directed.

  8. Segment group 5
    Repeat 999

    1. To indicate totals of a goods item.

    2. To specify handling and where necessary, notify hazards.

    3. To provide free form or coded text information.

    4. To specify additional or substitutional item identification codes.

    5. To specify physical measurements, including dimension tolerances, weights and counts.

    6. To specify the temperature setting.

    7. To identify a range.

    8. To specify the placement of goods in relation to equipment.

    9. Segment group 6
      Repeat 9

      1. To identify dangerous goods.

      2. To provide free form or coded text information.

  9. Segment group 7
    Repeat 9999

    1. To identify a unit of equipment.

    2. To specify a reference.

    3. To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

    4. To specify date, and/or time, or period.

    5. To identify a place or a location and/or related locations.

    6. To specify physical measurements, including dimension tolerances, weights and counts.

    7. To specify dimensions.

    8. To specify the seal number or a range of seal numbers.

    9. To provide free form or coded text information.

    10. To specify percentage information.

    11. To specify attached or related equipment.

    12. To specify handling and where necessary, notify hazards.

    13. Segment group 8
      Repeat 9

      1. To specify damage including action taken.

      2. To provide component details of an object (e.g. product, container) such as its type and the material of which it is composed.

    14. Segment group 9
      Repeat 9

      1. To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

      2. To identify a place or a location and/or related locations.

      3. To specify date, and/or time, or period.

    15. To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207.

  10. To provide control total.

  11. To end and check the completeness of a message.

Stedi.comDocumentationContact usPrivacy settings

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.