MEA Measurements
To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001)
Sequence
Element
Name
Type
Requirement
Min
Max
Repeat
Code identifying the broad category to which a measurement applies
Codes (178)
Code identifying a specific product or process characteristic to which a
measurement applies
Codes (1375)
The value of the measurement
R03050608: At least one of MEA-03, MEA-05, MEA-06 or MEA-08 is required
Code specifying the units in which a value is being expressed, or manner in
which a measurement has been taken
Codes (925)
Power to which a unit is raised
If C001-02 is not used, its value is to be interpreted as 1.
Value to be used as a multiplier to obtain a new value
If C001-03 is not used, its value is to be interpreted as 1.
Code specifying the units in which a value is being expressed, or manner in
which a measurement has been taken
Codes (925)
Power to which a unit is raised
If C001-05 is not used, its value is to be interpreted as 1.
Value to be used as a multiplier to obtain a new value
If C001-06 is not used, its value is to be interpreted as 1.
Code specifying the units in which a value is being expressed, or manner in
which a measurement has been taken
Codes (925)
Power to which a unit is raised
If C001-08 is not used, its value is to be interpreted as 1.
Value to be used as a multiplier to obtain a new value
If C001-09 is not used, its value is to be interpreted as 1.
Code specifying the units in which a value is being expressed, or manner in
which a measurement has been taken
Codes (925)
Power to which a unit is raised
If C001-11 is not used, its value is to be interpreted as 1.
Value to be used as a multiplier to obtain a new value
If C001-12 is not used, its value is to be interpreted as 1.
Code specifying the units in which a value is being expressed, or manner in
which a measurement has been taken
Codes (925)
Power to which a unit is raised
If C001-14 is not used, its value is to be interpreted as 1.
Value to be used as a multiplier to obtain a new value
If C001-15 is not used, its value is to be interpreted as 1.
The value specifying the minimum of the measurement range
L050412: If MEA-05 is present, then at least one of MEA-04 or MEA-12 is required
When citing dimensional tolerances, any measurement requiring a sign (+ or -),
or any measurement where a positive (+) value cannot be assumed, use MEA05 as
the negative (-) value and MEA06 as the positive (+) value.
The value specifying the maximum of the measurement range
L060412: If MEA-06 is present, then at least one of MEA-04 or MEA-12 is required
Code indicating the benchmark of, qualify or further define a measurement value
L07030506: If MEA-07 is present, then at least one of MEA-03, MEA-05 or MEA-06 is required
Codes (130)
Code indicating an attribute response when a numeric measurement value cannot
be determined
E0803: Only one of MEA-08 or MEA-03 may be present
Codes (59)
Code indicating the product surface, layer or position that is being described
Codes (110)
Code indicating the method or device used to record the measurement
Codes (14)
Code identifying a specific industry code list
P1112: If either MEA-11 or MEA-12 is present, then the other is required
MEA11 is the external code list for the unit of measure.
Codes (1056)
Code indicating a code from a specific industry code list
MEA12 defines the unit of measure for MEA03, MEA05, and MEA06 from an external
code list.